Pic of the Day

keri

Active Member
AKA: Why most ppl recommend wearing gloves while handling things in your tank.... (I obviously didn't lol)
 

keri

Active Member
Well, i've touched bristleworms with no problem before but i never saw his face, it retreated into the rock.
The spines weren't irritating and i was able to remove them with electrical tape :)
 

alix2.0

Active Member
agh that sucks.
i can never get them out with tape. i either use super glue or just leave them it.
 

oceanlover

Member
Oh, owh! Be sure to wash with betadine or some other disinfectant.
I use tweezers if I pick up a worm. You just have to be sure you don't squeeze too hard or you have two worms!
 

alix2.0

Active Member
Originally Posted by OceanLover
http:///forum/post/2851680
Oh, owh! Be sure to wash with betadine or some other disinfectant.
I use tweezers if I pick up a worm. You just have to be sure you don't squeeze too hard or you have two worms!
actually, you have one dead worm. they dont regenerate.
sometimes one half will live, but it depends where its been severed.
 
U

usirchchris

Guest
Originally Posted by alix2.0
http:///forum/post/2851683
actually, you have one dead worm. they dont regenerate.
sometimes one half will live, but it depends where its been severed.
Dangit...I was going to grab a worm and start cutting to increase my cleaning crew
.
 

keri

Active Member
I used some old electrical tape that I found in a drawer down here - it was really gunky and sticky, probably wouldn't use it for anything electrical now but it did the trick!!
 

bang guy

Moderator
There's a 80% chance those bristles are pure Calcium carbonate. Soaking the finger in undiluted vinegar will remove them, even below the skin.
If you beat the odds and they are Silicate based bristles then elmers glue is the best bet.
 

alix2.0

Active Member
ive tried vinegar thinking they were calcium a couple times and it never worked. maybe im just unlucky.
 
Top