Search results

So I'm wanting to get my PH up a little higher, it gets as low as 7.8 and I'm wanting it to stay at a stable 8.0 or 8.2 and have been reading up on this. I was looking at getting to kent marine 1400ML dosing container and was wondering if this is enough of a container for my 20g with a 10g sump...

I am also thinking of going to T5

I have quite a few zoos, some ricordia, RBTA, Frogspawn & hammer, and a little duncan

Well the start off I have a 20g high with a 10 gallon refuge. I have noticed my coral dont look as good as they could look and was wanting some input from you guys on this subject. I have a little hair algae issue but other than that nothing to major. For lighting I run 2 panaorama pros(@ about...

Crap! my bad I meant to put blue velvet* But yes go ahead I am curious to see what This damn thing is!

Well I bought this from the store today... like an idiot I couldn't remember what a black velvet nudi looked liked so I took the lfs word for it. I was in need of one because I got flatworms. WTH is this thing?[/URL][/IMG]

Well to start off I have a mixed reef 20g high. Been running for just about a year. I bought the ecoxotic panorama LED light along with the 445 blue LEDs so overall about 50 watts of leds. I am not happy at all with the color, seems to washed out and I don't think my coral are to happy with it...

Yeah my concern is I dont want to much weight on the back glass... I dont want it to give out

Well I'm setting up a 20gal long and do not have the space for a true refugium, so I was thinking of getting the CPR hang-on refugium and want to put the biggest one possible. My concern is would Water Capacity: 4.70 Gallons Dimensions: 25" L x 4.5" W x 12" T be to much weight on the back glass...

Well I have a 20 gallon reef I got going with a 10 gallon sump/refuge my question is I plan on putting the heater in my sump. Since there is really only about 10 gallons or less running through the sump at a time could I use a smaller heater or do I need one rated for around 30gals? I just am...

Well I took the thing out because it was driving me nuts! I put 2 air lines in my sump for about 2 days to get extra O2 in my tank and it has finally cleared up... not all the way but it is about 80% clear. I really appreciate all of your guys help. Would be lost without you guys!

well I decided to plug in my skimmer I stopped running it because it wouldn't fit in my sump. But as soon as I plugged it in the cup filled filled up immediately. I have the valve wide open also wth is going on?

Thats what I was thinking that maybe it was a bacteria bloom... but wasn't sure wanted to run everything by you fellow fish ppl. I will give the air line a try today and see what that does.

Okay well to start off I have a 20gal reef. my issue all started when I switched over to my drilled 20gal I setup along with my 10gal sump, I made a rookie mistake by use that damn GE II silicone but only on one baffle of the sump. So then when I found out it was mildrew resistant I decided to...

Oh also what is a safe way to remove all of the old silicone off the tank?

Well I decided I am going to tear my 10 gallon sump and re do it with this momentive sealant. My question is how long should I let this stuff sit before exposing it to the saltwater? Here is a picture of the stuff I am going to use.

I would say at least 2 days

Well fellas I made my first sump/ refugium. I used some silicone from home depot that was 100% silicone and actually ran out of that stuff so ran to ace hardware just because it is closer. I looked all around for something that was not mildew resistant and came across the silicone 2 GE general...

Almost finished painting the inside of my canopy and routed the inside so my lights would fit

Yes I have coral in my tank unfortunately