flricordia
Active Member
Did some mods with my new 14gl biocube. Swapped out the hood for a 70wt Sunpod MH.
Removed the filter compartment and cut out sectrions from chamber 1 to 2 so could have one larger fuge for chaeto.
Siliconed it back in and scrapped the paint off the back of tank and siliconed a small reflector with a 10wt daylight bulb for chaeto. This is looking down into the back with the fuge light on. This way I can run the light at night and not have spill-over into the tank.
-med.jpg)
Fuge with chaeto. I basically pulled out everything, replaced pump with a maxijet 900 and added a small 50wt heater where the pump is. Working pretty good.
Moved LR and zoos from other tank in. For those familiar with the Bio-cube, I closed the bottom grate where water enters the back so all flow would be at top surface skimmer. I closed off part of it to skim more of surface area.
Removed the filter compartment and cut out sectrions from chamber 1 to 2 so could have one larger fuge for chaeto.
Siliconed it back in and scrapped the paint off the back of tank and siliconed a small reflector with a 10wt daylight bulb for chaeto. This is looking down into the back with the fuge light on. This way I can run the light at night and not have spill-over into the tank.
Fuge with chaeto. I basically pulled out everything, replaced pump with a maxijet 900 and added a small 50wt heater where the pump is. Working pretty good.
Moved LR and zoos from other tank in. For those familiar with the Bio-cube, I closed the bottom grate where water enters the back so all flow would be at top surface skimmer. I closed off part of it to skim more of surface area.
