nordy
Active Member
My new unit runs and pumps but after a few minutes of operation the level of water in the canister will start dropping. After running a full day or so, it can drop an inch or two, sometimes more. It is still putting out a good flow into the tank but this air gap bugs me! When I turn it off to feed fish/corals, the accumulated air burps back into the tank through the intake tube but as soon as I start it up again, it the level in the canister starts dropping again.
I have it sitting on the floor with the top about 10 inches below the bottom of the 55gal tank. The intake is at one end of the tank with the long extension tube in place and the output is at the other end.I don't see any leaks in either tube and have tried adjusting the inand out shutoff valves, with no sucess. Anybody have some advice on this?
Thanks,
John
I have it sitting on the floor with the top about 10 inches below the bottom of the 55gal tank. The intake is at one end of the tank with the long extension tube in place and the output is at the other end.I don't see any leaks in either tube and have tried adjusting the inand out shutoff valves, with no sucess. Anybody have some advice on this?
Thanks,
John