C
cjke77418
Guest
I inherited a odyssea light fixture 48" with 2 175w mh and 2 96w pcs with 6 moonlights. THe balast for the pcs went bad and I cannot find a replacement. Any help would be appriciated.
scsinet
Active Member
Originally Posted by cjke77418
http:///forum/post/3169274
I inherited a odyssea light fixture 48" with 2 175w mh and 2 96w pcs with 6 moonlights. THe balast for the pcs went bad and I cannot find a replacement. Any help would be appriciated.
Do you want to try to DIY a replacement ballast or repair/replace the ballast module you have?
Odyssea is an import fixture and finding replacement parts for it may be difficult. You may be better off just retrofitting a new ballast into your ballast's enclosure or buy/build a whole new enclosure. There are certainly ballasts available that drive your lamps, but what I don't know is if it'll fit into what you have.
http:///forum/post/3169274
I inherited a odyssea light fixture 48" with 2 175w mh and 2 96w pcs with 6 moonlights. THe balast for the pcs went bad and I cannot find a replacement. Any help would be appriciated.
Do you want to try to DIY a replacement ballast or repair/replace the ballast module you have?
Odyssea is an import fixture and finding replacement parts for it may be difficult. You may be better off just retrofitting a new ballast into your ballast's enclosure or buy/build a whole new enclosure. There are certainly ballasts available that drive your lamps, but what I don't know is if it'll fit into what you have.
C
cjke77418
Guest
Thanks I would be interested in a diy I have found some info that a workhorse 7 ballast would work but there are a few workhorse 7 ballasts Idont know which one is right If you need some measurements i can post those or any other info you might need to help get the right one
scsinet
Active Member
Originally Posted by cjke77418
http:///forum/post/3169614
Thanks I would be interested in a diy I have found some info that a workhorse 7 ballast would work but there are a few workhorse 7 ballasts Idont know which one is right If you need some measurements i can post those or any other info you might need to help get the right one
If you go to Fulham's web site, they have a little tool right on the main page. You select what quantity and type of lamps you have, and it'll spit out the exact workhorse model and the wiring diagram needed to hook it up.
http:///forum/post/3169614
Thanks I would be interested in a diy I have found some info that a workhorse 7 ballast would work but there are a few workhorse 7 ballasts Idont know which one is right If you need some measurements i can post those or any other info you might need to help get the right one
If you go to Fulham's web site, they have a little tool right on the main page. You select what quantity and type of lamps you have, and it'll spit out the exact workhorse model and the wiring diagram needed to hook it up.
C
cjke77418
Guest
Thanks I found the diagram and am going to order one Ill pput up a post as soon as I get it working again and post some pics
scsinet
Active Member
Originally Posted by cjke77418
http:///forum/post/3169688
Thanks I found the diagram and am going to order one Ill pput up a post as soon as I get it working again and post some pics
Just beware that is entirely possible that the replacement ballast will not fit inside the enclosure. Ballasts often do not have any standard form factor. You may need to do a little DIYing, but nothing is impossible.
http:///forum/post/3169688
Thanks I found the diagram and am going to order one Ill pput up a post as soon as I get it working again and post some pics
Just beware that is entirely possible that the replacement ballast will not fit inside the enclosure. Ballasts often do not have any standard form factor. You may need to do a little DIYing, but nothing is impossible.