Building a tank base

[stevep]

I'm in the process of finishing my basement and I want to build a wall at the end of the stairway with a large (60-100) gallon glass tank viewable from both sides built into it about 4 feet from the ground. Does anyone have any suggestions or blueprints for building a base that can support 600 to 1000 pounds or more (the basement floor is concrete)?

 

[burnnspy]

Yes, I am buildin a stand from scratch for my 125gal.
1. Top frame = 2pcs 2"x4" length of the tank
2. Use 4pcs 2"x4" 14 inches long as crossbeams
1. Bottom frame is identical to the top frame.
1. Use 8pcs 2"x4" 24-30" high as legs to connect the top and bottom frames
2. Make sure the top frame and 8 legs are connected so the 8 legs and top frame make contact with the tank bottom.
You may then use 1/2-3/4 inch thick panels of any hard wood to surround the frame for cosmetics.
BurnNSpy