ledlampshining
New Member
Aluminum Fin 180 Degree LED Street Lamp
1,Using high brightness of original packed Bridgelux LED Chip which achieves 100lm/w
2, 360 degree rotatable lamp base,make sure the led face to just right to the ground
3, Aluminum fin 6063 heat sink built-in(Patent Design),the best method of heat dissipation system,no more heat problem
4, This street lamp is available with E40/E39(mogul) and E27/E26 (Medium base)
5, Available running at range of 100-300VAC directly,277VAC north America suitable
6, No spot,no black area,long lifespan and low brightness decay
7, CE & RoHS & EMC & LVD & TUV & ETL certificates
8, Replaces 75W to 105W matel halide,high pressure sodium and halogen
9, LED chips are protected from water and dust by waterproof loop and cover
10, High PF (PF>0.9) built-in driver(self-ballast)
1, The lamp base is 360 degree rotatable,make sure it is the right beam angle wanted
2, Using a M3 Allen screwdriver to tight the lamp base when the right beam angle is there
Ballast or transformer must be bypassed before replacement
This 28W LED Street Lamp is used to replace the existing matel halide,high pressure sodium,
Mercury and halogen(75w to 105w)
As a retrofit aluminum fin led street lamp,it’s available using in cobra fixture,wall fixture and
canopy fixtures etc.
1. Outdoor street lighting, wall pack lighting,canopy lighting, pathway lighting,factory lighting,supermarket lighting,parking lot and stadium lighting etc.
1,Using high brightness of original packed Bridgelux LED Chip which achieves 100lm/w
2, 360 degree rotatable lamp base,make sure the led face to just right to the ground
3, Aluminum fin 6063 heat sink built-in(Patent Design),the best method of heat dissipation system,no more heat problem
4, This street lamp is available with E40/E39(mogul) and E27/E26 (Medium base)
5, Available running at range of 100-300VAC directly,277VAC north America suitable
6, No spot,no black area,long lifespan and low brightness decay
7, CE & RoHS & EMC & LVD & TUV & ETL certificates
8, Replaces 75W to 105W matel halide,high pressure sodium and halogen
9, LED chips are protected from water and dust by waterproof loop and cover
10, High PF (PF>0.9) built-in driver(self-ballast)
1, The lamp base is 360 degree rotatable,make sure it is the right beam angle wanted
2, Using a M3 Allen screwdriver to tight the lamp base when the right beam angle is there
Ballast or transformer must be bypassed before replacement
This 28W LED Street Lamp is used to replace the existing matel halide,high pressure sodium,
Mercury and halogen(75w to 105w)
As a retrofit aluminum fin led street lamp,it’s available using in cobra fixture,wall fixture and
canopy fixtures etc.
1. Outdoor street lighting, wall pack lighting,canopy lighting, pathway lighting,factory lighting,supermarket lighting,parking lot and stadium lighting etc.
