Help with sump plumbing please!

dankbardy31

dankbardy31

Member
Hello all,
I just bought a used 110g tank to transfer my 60g inhabitants into. The tank came with a built in overflow and a sump but none of the plumbing. The holes are drilled in the bottom of the tank and a corner overflow installed. I need instructions on what parts I will need and what to use to connect the pipes and most of all, how to do it. Any help of links would be of great assistance. Feel free to PM me. Thanks so very much in advance!
 
kingsmith

kingsmith

Member
If you could get some picks and or a diagram/drawing of your set up that would reaaly help.
generally though some PVC and flexible piping a ball valve or two and of course open minded patience you can solve all your issues
Of course again keep it freshh? and pictures/diagram helps
 
dankbardy31

dankbardy31

Member
Ok I'll try and get those up. What types of adhesive are used with piping for aquariums. I'm assuming not red hot blue pvc glue. Also what type of piping do most people use. Diameter, material Etc? Do you put a shut off valve on the intake and output lines?
 
You must log in or register to reply here.
Top