High water in pump? Help

[luvmybizz]

I noticed today that in my 29 biocube the water where the pump is is Way over that maximum. Like we are talking it is 3 inches from the top! Wat is causing this and how do i get it to go down?
p.s. pump is running just like it is supposed to, plenty of water flow!

 

[yerboy]

it will go down as water evaporates. just keep an eye on your salinity once it reaches the desired level.
the compartment with the pump is the only spot in the biocube that will be affected by evaporation.

 

[phils29bcinwa]

Originally Posted by luvmybizz
http:///forum/post/2474164
I noticed today that in my 29 biocube the water where the pump is is Way over that maximum. Like we are talking it is 3 inches from the top! Wat is causing this and how do i get it to go down?
p.s. pump is running just like it is supposed to, plenty of water flow!
you might want to take some water out of your tank, that will make your level go down. It doesnt matter if you have taken your bioballs out, but if not you are flooding them and that might not be good.

 

[sigmachris]

You just put too much water in the tank and that is where it will overflow to. Look at your back wall, I would imagine there is water spilling over that too avoiding potential mechanical filters in Chamber #1.