C
cowbuoy
Guest
the 2x4 frame
C
cowbuoy
Guest
2
C
cowbuoy
Guest
3
C
cowbuoy
Guest
EVERYTHING WAS NAILED WITH A NAIL GUN -- WITH A LOT OF NAILS
EVERYTHING WAS WOOD GLUED TOO
EVERYTHING WAS WOOD GLUED TOO
C
cowbuoy
Guest
5
C
cowbuoy
Guest
6
C
cowbuoy
Guest
HALF INCH PLYWOOD -- 2 PIECES ON TOP
C
cowbuoy
Guest
MITERED RIP CUT CORNERS ON THE PLYWOOD
A FLOOR AND A BACK WAS ADDED LATER
A FLOOR AND A BACK WAS ADDED LATER
C
cowbuoy
Guest
PRE-PRIMED TRIM WITH A PRE-MADE KITCHEN CABINET DOOR FROM HOME DEPOT
THE TOP TRIM WAS RAISED ABOUT A 1/4 INCH ABOVE THE TOP TO HOLD THE TANK IN PLACE A LITTLE - IF YOU DO THIS MAKE SURE YOU MEASURE YOUR TANK AT THE TANK FRAME SO YOU DONT HAVE TO ROUTER IT OUT A TAD LIKE I DID!
ALSO SOME SEMI PADDED FLOOR TILE WAS USED ON THE TOP TO CUSHION THE TANK A LITTLE FROM JOSTLING
THE TOP TRIM WAS RAISED ABOUT A 1/4 INCH ABOVE THE TOP TO HOLD THE TANK IN PLACE A LITTLE - IF YOU DO THIS MAKE SURE YOU MEASURE YOUR TANK AT THE TANK FRAME SO YOU DONT HAVE TO ROUTER IT OUT A TAD LIKE I DID!
ALSO SOME SEMI PADDED FLOOR TILE WAS USED ON THE TOP TO CUSHION THE TANK A LITTLE FROM JOSTLING
C
cowbuoy
Guest
thanks
it is for a 50 gallon breeder (36x18x18) - a very nice size in my opinion
I painted it black
btw black paint ( and I mean true black) it actually hard to find -- not many companys make it -- go figure
it is for a 50 gallon breeder (36x18x18) - a very nice size in my opinion
I painted it black
btw black paint ( and I mean true black) it actually hard to find -- not many companys make it -- go figure
tony detroit
Active Member
VERY NICE JOB
escape2thewater
Active Member
nice job cowbouy! looks 100x stronger then a store bought stand!
