Led help needed.

M

mhayes462

Guest
I am building an led fixture for my tank consisting of 3 meanwell eln drivers with 14 whites on one driver, 10 colors on another driver, and 2 parallel strings of 14 blue LEDs on the third. I've wired them all and done the diode and short tests and all. Everything is working great except I can't get my driver on my blues to go over 570 mah, and 650 on my white driver. The driver on the colors will go up to 1.8. What is going on? Am I missing something? They are Bridgelux LEDs if that matters. Any help is greatly appreciated.
Mike Hayes
 
acrylic51

acrylic51

Active Member
Not an expert or been staying on top of the LED game as of late, but wouldn't the number of LEDs in the string affect your overall ma........Also did you open the eln driver up and adjust them as well.......
 
M

mhayes462

Guest
I'm not sure on the number of LEDs affecting it. Yes, I opened them up and adjusted the svr2 pot on the inside of the driver. My external pot was also turned all the way up. The driver with the colored LEDs adjusts fine. I'm stumped
Mike Hayes
 
M

mhayes462

Guest
Svr1 pot inside the driver was turned down a little.
Mike Hayes
 
You must log in or register to reply here.
Top