rubberburnerme
Member
SR. skimmers are a good cheep skimmer that with a little 20 min.
modifacation they will rock. if your a reefer you'll know this take the RIO pump and find that door that will not stay open there your almost done and you got a good door prop.next get a mag r a close to performance model that has a much higher out put as for ex. rio 2500=mag12 than get a threaded to barb fitting cut it with a hack saw at the end of the threads {save the threaded end} than take the parts out and there should be 2 90deg. elbows for the air line to attach stick them in side of the cut end that you saved I used a soidering gun to melt them in place and assemble it according to directions
modifacation they will rock. if your a reefer you'll know this take the RIO pump and find that door that will not stay open there your almost done and you got a good door prop.next get a mag r a close to performance model that has a much higher out put as for ex. rio 2500=mag12 than get a threaded to barb fitting cut it with a hack saw at the end of the threads {save the threaded end} than take the parts out and there should be 2 90deg. elbows for the air line to attach stick them in side of the cut end that you saved I used a soidering gun to melt them in place and assemble it according to directions