westwind77
Member
I was curious if anyone has any info on the Seio Powerhead line, in specific the M2600 (2600 gph)?
I need more flow in my 110 x-hi. Currently I have a Koralia 4, and an Eheim 1262 at 900 gph, however that one is run in-line with a mechanical filter and it is about 5 feet from floor to output so it loses a lot of power. I have an Eheim Wet/Dry Canister filter, but it does not add much to the gph.
I have algae growing on rock where there is low flow. The system is set up to be viewed from 3 of the 4 sides. Only the small 18" side is where I can put equipment so looking to keep things simple.
Using a 5 stage RO/DI for water, not overfeeding, MH lights on for 7-8 hours/day.
Thanks!
I need more flow in my 110 x-hi. Currently I have a Koralia 4, and an Eheim 1262 at 900 gph, however that one is run in-line with a mechanical filter and it is about 5 feet from floor to output so it loses a lot of power. I have an Eheim Wet/Dry Canister filter, but it does not add much to the gph.
I have algae growing on rock where there is low flow. The system is set up to be viewed from 3 of the 4 sides. Only the small 18" side is where I can put equipment so looking to keep things simple.
Using a 5 stage RO/DI for water, not overfeeding, MH lights on for 7-8 hours/day.
Thanks!
