iyaoyas
Member
I know it's not aquarium equipment, but it will get you a lot closer than looking through the glass and it will help me buy more aquarium stuff.
I have a brand new Tusa Imprex drysuit. It has never been in the water and the seals are not cut, I just tried it on and then put it back in the plastic bag.
The size is XL with size 12 boots.
I am selling the suit with the hose to connect to your first stage for $550 shipped anywhere in the lower 48. I will also include a new pair of Gators for your legs, new hood, and new gloves.
So for a total of $550 you could have at least $1300 or more worth of gear. Everything is brand new and ready to go.
Email robgregory98223@earthlink.net@nospamplease.com (just remove the second - and everything after it).
Here are the specs from Tusa's website.
TUSA Imprex: For the Diver Who Prefers Durability
Newly invented durable 3.5mm M(H) neoprene rubber
Water repellent, super tough laminated polyester outer skin
Automatic shoulder dump valve
Ultra-reliable 360 degree slide chest inflator valve
Super soft stretchable neoprene neck and wrist seals
Internal braces with detachable clips
Flexible boots with non-slip soles
Durable knee pads
The Imprex Drysuit is available in ten men's sizes XS-XXL in blue as pictured.
click here for size chart
The Imprex suit is manufactured from recently developed high quality 3.5 mm M(H) rubber. This new neoprene not only provides incredible warmth, but also increased comfort and mobility. The super tough M(H) rubber is laminated with a polyester jersey on the outside for extra durability. It has a water repellent coating to help with drying and to keep the diver extra warm during the dive.
Features Standard on All TUSA Drysuits
All TUSA drysuits contain extras normally reserved for the highest end suits as standard equipment.
Neoprene Neck and Wrist Seals – TUSA drysuit neck and wrist seals are manufactured from super soft stretchable smooth-skin neoprene rubber to provide ultimate water sealing properties in complete comfort.
Flexible Boots with Hard Non-Slip Soles – Low cut boot design provides ease and comfort when getting into and out of the suit, and also allows for an easy and flexible kicking motion with fins. The sole is modeled on those worn by yachtsmen to add that super grip when needed. TUSA drysuit boots are designed to fit all TUSA diving fins and include an easy-off foot mold at the rear of the boot.
Internal Braces with Detachable Clips – All TUSA drysuits now come complete with double "Y" detachable braces. This added comfort level is normally reserved for the most expensive drysuits, but TUSA supplies these as standard equipment.
Ultra-Reliable Slide Chest Valve – Tusa has redesigned the way drysuits inflate. Using the ultra reliable Chest Inflator sliding mechanism, all TUSA drysuits will power on and on, featuring core valve technology and precision manufacturing. The chest inflator is securely fixed to a 360 degree swivel allowing inflator hoses to be attached from any angle. A dust cap has been included for maximum protection of your equipment.
Automatic Shoulder Dump Valve – Shoulder valves can be very hard to set, but with the TUSA Automatic Shoulder Control, drysuit diving could not be easier. Just switch to "lock" when required and the drysuit will keep all the air inside the suit; adjust the control to "auto" and excess air will gently escape. Lock and auto can be overridden at any time by depressing the purge button located in the middle of the valve to release extra air.
I have a brand new Tusa Imprex drysuit. It has never been in the water and the seals are not cut, I just tried it on and then put it back in the plastic bag.
The size is XL with size 12 boots.
I am selling the suit with the hose to connect to your first stage for $550 shipped anywhere in the lower 48. I will also include a new pair of Gators for your legs, new hood, and new gloves.
So for a total of $550 you could have at least $1300 or more worth of gear. Everything is brand new and ready to go.
Email robgregory98223@earthlink.net@nospamplease.com (just remove the second - and everything after it).
Here are the specs from Tusa's website.
TUSA Imprex: For the Diver Who Prefers Durability
Newly invented durable 3.5mm M(H) neoprene rubber
Water repellent, super tough laminated polyester outer skin
Automatic shoulder dump valve
Ultra-reliable 360 degree slide chest inflator valve
Super soft stretchable neoprene neck and wrist seals
Internal braces with detachable clips
Flexible boots with non-slip soles
Durable knee pads
The Imprex Drysuit is available in ten men's sizes XS-XXL in blue as pictured.
click here for size chart
The Imprex suit is manufactured from recently developed high quality 3.5 mm M(H) rubber. This new neoprene not only provides incredible warmth, but also increased comfort and mobility. The super tough M(H) rubber is laminated with a polyester jersey on the outside for extra durability. It has a water repellent coating to help with drying and to keep the diver extra warm during the dive.
Features Standard on All TUSA Drysuits
All TUSA drysuits contain extras normally reserved for the highest end suits as standard equipment.
Neoprene Neck and Wrist Seals – TUSA drysuit neck and wrist seals are manufactured from super soft stretchable smooth-skin neoprene rubber to provide ultimate water sealing properties in complete comfort.
Flexible Boots with Hard Non-Slip Soles – Low cut boot design provides ease and comfort when getting into and out of the suit, and also allows for an easy and flexible kicking motion with fins. The sole is modeled on those worn by yachtsmen to add that super grip when needed. TUSA drysuit boots are designed to fit all TUSA diving fins and include an easy-off foot mold at the rear of the boot.
Internal Braces with Detachable Clips – All TUSA drysuits now come complete with double "Y" detachable braces. This added comfort level is normally reserved for the most expensive drysuits, but TUSA supplies these as standard equipment.
Ultra-Reliable Slide Chest Valve – Tusa has redesigned the way drysuits inflate. Using the ultra reliable Chest Inflator sliding mechanism, all TUSA drysuits will power on and on, featuring core valve technology and precision manufacturing. The chest inflator is securely fixed to a 360 degree swivel allowing inflator hoses to be attached from any angle. A dust cap has been included for maximum protection of your equipment.
Automatic Shoulder Dump Valve – Shoulder valves can be very hard to set, but with the TUSA Automatic Shoulder Control, drysuit diving could not be easier. Just switch to "lock" when required and the drysuit will keep all the air inside the suit; adjust the control to "auto" and excess air will gently escape. Lock and auto can be overridden at any time by depressing the purge button located in the middle of the valve to release extra air.