Protein skimmers, T5 fixture, tank, Cheap

S

saltycrab

Guest
I am upgrading all of my equipment and selling some things that are in good shape. I will consider any offer since I just want to move these. PM me for details.Octopus Recirculating Protein skimmer - DNW-110 imported by Coralvue. This has the gate valve modification, and mesh mod done. Mods cost me $40 to complete. It was ordered April 21 for 176.00. Buy it shipped for $130.
AquaC Remora Protein Skimmer
with Maxi-Jet 1200 Pump
This was replaced for me by AquaC around March with a brand new unit. It has the intake fitting used on the Remora Pro which increases bubbles (AquaC sent the fitting) $100 Shipped

46 Gallon Bow front in excellent shape. It was used for less than 2 years. $50 local pick up or around town delivery

36" Current Nova Extreme 4 x 39 watt, 156 watt T5HO with individual Tek1 reflectors by sunlight supply. This fixtures has been rebuilt to accept individual reflectors. The bulbs are over a year old and need replacement. It currently has 3 actinics and 1 10K. $110 Shipped

Marine Land 150 watt heater
15$ shipped

Aquacrylics HOB acrylic overflow box
(400-500 GPH). This is a very high quality overflow made from 1/4 acrylic with perfect welds Shipped $50

This is a picture of much of the equipment
http://i39.photobucket.com/albums/e1.../IMG_00881.jpg
 
S

saltycrab

Guest
Originally Posted by ocyoo
http:///forum/post/2815579
I will buy your t5ho fixture, but what do you mean by rebuilt?
I removed the stock POS single reflector and installed individual reflectors. Because the individual reflectors are wider I had to widen the unit to 10.5" wide. This involved a good amount of fabrication but the end result was very good.
Here is a quick pic I just snapped. Excuse the salt spray; I haven't cleaned up the equipment yet.
 
S

saltycrab

Guest
Originally Posted by Metcalf VT
http:///forum/post/2816032
Can I get the specs on the protein skimmers
This is the Octopus
- 4.29" Diameter
- 23.4" Tall
- Equiped with with needle wheel impeller recirculating pump
- Requires additional feed pump with gph rating at approx. 1.5 times volume of your system.
- Recommended for aquariums up to 125 gallons
- Footprint 6" x 11"
This is the Remora:
Model # : Remora Hang-On Tank Size (Gallons): 20–75 Included Pump: MaxiJet 1200 Skimmer Height: 17.5" Minimum Tank Height: 12.75" Minimum Overhead Clearance for Proper Function: 5.5" Depth: 2.75" Width: 6"
I wouldn't recommend the Octopus for an aquarium larger than 75 gallons unless lightly stocked. I wouldnt use the Remora on a tank larger than 40 unless lightly stocked.
 

metcalf vt

Member
Originally Posted by SaltyCrab
http:///forum/post/2816107
This is the Octopus
- 4.29" Diameter
- 23.4" Tall
- Equiped with with needle wheel impeller recirculating pump
- Requires additional feed pump with gph rating at approx. 1.5 times volume of your system.
- Recommended for aquariums up to 125 gallons
- Footprint 6" x 11"
This is the Remora:
Model # : Remora Hang-On Tank Size (Gallons): 20–75 Included Pump: MaxiJet 1200 Skimmer Height: 17.5" Minimum Tank Height: 12.75" Minimum Overhead Clearance for Proper Function: 5.5" Depth: 2.75" Width: 6"
I wouldn't recommend the Octopus for an aquarium larger than 75 gallons unless lightly stocked. I wouldnt use the Remora on a tank larger than 40 unless lightly stocked.
Nevermind then, I am going to go with a larger skimmer
 
Top