Red Sea Berlin pump???

dzones

dzones

Member
I have a Berlin Red Sea skimmer (the classic one) that had the pump just decide to malfunction. It was actually sending an electrical charge through the water..YIKES!
Anyway, I need a new pump to replace it but cannot seem to find one nor do I know the gph rating of it.
Can anyone tell me what it is? Or what pump would be suitable to use on it?
Thanks
Dave
:help:
 
gregvabch

gregvabch

Active Member
4. Pump Selection
All Turbo models are supplied with the Berlin Turbo pump including the 12
blade TurboJet impeller and combined air inlet / water flow regulator.
Venturi models are supplied with or without (see check box on package) the
optional Berlin pump which can also be purchased separately. If you have not
purchased a Berlin pump select a pump as defined below. If the pump is to be
located more than 8” (20cm) from the Venturi inlet a higher rated pump may
be required.
Berlin Venturi HO & Classic Model :
500 gallons per hour (2000 liters per hour), 10 ft (3 meter) water or 4.3 psi
Berlin Venturi XL Model :
550 gallons per hour ( 2200 liters per hour), 10 ft (3 meter) water or 4.3 psi
 
gregvabch

gregvabch

Active Member
that's from the instruction manual that's available on another site, cant post a link to it though. i'm not really sure how to modify another pump for air injection, maybe somebody else could help you with that. HTH
 
You must log in or register to reply here.
Top