bryce.martin23
Member
Just saw that there was an equipment board here and posted in the wrong board, anyway, i just purchased a coralife pure flo II ro/di unit. I installed the unit and im producing a horrible ratio of good water to waste water. I disassembled the entire unit and put it all back together and still getting a 8:1 ratio. I installed a pressure gauge to the membrane housing and im getting 80 psi to the membrane. Good water line drips about one drop per sec, did the math and for 2 1/2 hours i should of filled up a five gallon bucket. I didnt even come close, even for the cold days. Any words of wisdom, or perhaps any advice would be greatly appreciated.