Some Great Advice!!

[cayman isl]

in one of the threads about the SeaCone 100, benj2112 suggested the following:
"Of the above mentioned modifications sealing the collection cup to inner tube was the easiest, cheapest, and most effective. It helps by causing all the air to exit through the collection cup tube...Hopefully bringing the skimmate with it...as well as a reduction of micro bubbles through the return flow.
I just added a couple wraps of teflon tape to the bottom of the collection cup where it seals in the inner tube."
I did that this morning when I read the suggestion and although my skimmer was working just fine, it has doubled it's output just by this easy modification.
Some great advice!!!! Good Job Ben......
Cayman Isl has attached this image:

 

[benj2112]

Thank you for the congrats, but I can't take the credit.
I had just copied the mods from a thread on this site to a Word file and saved it in my personal SW fish help files. I didn't save the name of the author, unfortunately. So, the real thanks goes to the person who originally came up with this. I was just passing the info on.
So, if the real sea clone modifier reads this then be sure to take the credit for your ideas.

 

[doodle1800]

I'll try it as well! - thanks!