andymi
Member
Hey all just thought I would share with you my recent moonlight project I did for my tank. Although it does not simulate the lunar cycle or anything, it gives the fish a simulation of moonlight.
Equipment:
Go to Home ***** or something similar and pick up two light bulb sockets. I used plastic ones. The ones I used had a flat bottom and two screws for wiring. Also pick up the length of wiring you need, a plug for power and two blue bulbs. I used 2 11 watt party bulbs.
On the first socket I connected the wire and ran it to the other light socket where I connected the other end of the wire and the wire that goes to the plug. After connecting the wires I screwed the lights into the canopy on my tank. Connected the power cord to a timer and I was all set. Pretty easy project and a beautiful look when the lights are off.
--Andy
I will have pictures on my website shortly
Equipment:
Go to Home ***** or something similar and pick up two light bulb sockets. I used plastic ones. The ones I used had a flat bottom and two screws for wiring. Also pick up the length of wiring you need, a plug for power and two blue bulbs. I used 2 11 watt party bulbs.
On the first socket I connected the wire and ran it to the other light socket where I connected the other end of the wire and the wire that goes to the plug. After connecting the wires I screwed the lights into the canopy on my tank. Connected the power cord to a timer and I was all set. Pretty easy project and a beautiful look when the lights are off.
--Andy
I will have pictures on my website shortly