michaeltx
Moderator
3rd installment for SWF.com
The first installment so you decided to setup a tank is here https://forums.saltwaterfish.com/t/293520/so-youve-decided-to-create-your-own-tank-prt1
The second installment here is the cost cutting tips post https://forums.saltwaterfish.com/t/293907/cost-cutting-and-tank-placement-prt2
First after figuring out where you want the tank and using the cost saving tips now you are ready to begin actually setting up the tank.
Now the fun begins.
Did you remember the Ro filter? if not you will need to find a water source to fill your tank. contrary to some beleifs tap water is not all right. especially since recently they have found elements of medical drugs that we take for our illness' is showing up in the tap water. not only that but the EPA says low levels of things like copper and mercury and lead are fine in te water along with phosphates, nitrates, and many other harmful elements. You can get water from Wal-mart or any other store just remember to read the label and also remember that some places dont replace the filters as often as needed. If you have a LFS close to you that sell RO/DI or pre mixed saltwater that is another way to go.
Alright now done to buisness.
When you start getting ready to put everything in the tank. its best to start with a dry base rock directly on the glass or on a thin layer of sand and get your first course of rock down. This will insure things like gobie and pistol shrimp cant dig under the rock and comprimise the structure of the rock. If you add all the sand at one time it will leave an area where they can dig under and could cause the rock structure to collapse if it hits the glass right it could cause the galss to crack and break so keep that in mind.
As you add the first layer of rock add your sand around it and build up.once you have your base course of rock and sand in the tank this is where you can add the water to the tank. when you go to add the water to the tank try to get it as close to where you want it with temperature and salinity so that when you add the rock it will help if only a little to keep some of the life alive in the live rock. Dont fill the tank all the way up or you will have to take some out when you start adding Rock to the tank. If you are planning on powerheads towards the bottom of the tank and behind your rockwork this is the time to add them while you can access the area easily.
Now comes the fun part.
There is no right or wrong way to aquascape the tank. there are some things that arent very good to do though.
try not to stack the rock against the back wall of the tank. This will help keep flow going around the rocks and help keep deterious down and help with water quality.
Try to leave lots of caves and cravases for fish to swim and hide in. This will help them feel safe and secure in their new home.
Try to leave penty of swimming room and position the rock in a natural look,
And lastly Dont sweat it once you have all the rock in the tank you can always move it around and change it up.
The first installment so you decided to setup a tank is here https://forums.saltwaterfish.com/t/293520/so-youve-decided-to-create-your-own-tank-prt1
The second installment here is the cost cutting tips post https://forums.saltwaterfish.com/t/293907/cost-cutting-and-tank-placement-prt2
First after figuring out where you want the tank and using the cost saving tips now you are ready to begin actually setting up the tank.
Now the fun begins.
Did you remember the Ro filter? if not you will need to find a water source to fill your tank. contrary to some beleifs tap water is not all right. especially since recently they have found elements of medical drugs that we take for our illness' is showing up in the tap water. not only that but the EPA says low levels of things like copper and mercury and lead are fine in te water along with phosphates, nitrates, and many other harmful elements. You can get water from Wal-mart or any other store just remember to read the label and also remember that some places dont replace the filters as often as needed. If you have a LFS close to you that sell RO/DI or pre mixed saltwater that is another way to go.
Alright now done to buisness.
When you start getting ready to put everything in the tank. its best to start with a dry base rock directly on the glass or on a thin layer of sand and get your first course of rock down. This will insure things like gobie and pistol shrimp cant dig under the rock and comprimise the structure of the rock. If you add all the sand at one time it will leave an area where they can dig under and could cause the rock structure to collapse if it hits the glass right it could cause the galss to crack and break so keep that in mind.
As you add the first layer of rock add your sand around it and build up.once you have your base course of rock and sand in the tank this is where you can add the water to the tank. when you go to add the water to the tank try to get it as close to where you want it with temperature and salinity so that when you add the rock it will help if only a little to keep some of the life alive in the live rock. Dont fill the tank all the way up or you will have to take some out when you start adding Rock to the tank. If you are planning on powerheads towards the bottom of the tank and behind your rockwork this is the time to add them while you can access the area easily.
Now comes the fun part.
There is no right or wrong way to aquascape the tank. there are some things that arent very good to do though.
try not to stack the rock against the back wall of the tank. This will help keep flow going around the rocks and help keep deterious down and help with water quality.
Try to leave lots of caves and cravases for fish to swim and hide in. This will help them feel safe and secure in their new home.
Try to leave penty of swimming room and position the rock in a natural look,
And lastly Dont sweat it once you have all the rock in the tank you can always move it around and change it up.