pocari
New Member
I'm new to this and I've started a 5 Gallon Nano I guess.
Specs:
6 lbs of Live Rock
Penguin Mini BIO-Wheel Power Filter
2 x 15 watt Flourescent Tubes
Marine Sand
Thermometer
I also have a Marine Lab Test Kit made by Red Sea
I added a Raw Shrimp in the tank about 3 days ago. I did tests and the results came out as this.
Results:
Alkalinity = High
Ammonia = 5.0
pH = 8.4
Nitrite = 0.1-0.2
Nitrate = High Range - 25 Low Range - 5.0
I removed the Raw Shrimp after I took the test because I noticed it was bloating and smelled. Was this a good choice to remove the shrimp? Is there any problems with my results? If so, how can I improve them? Any other advice would help. Thanks
Specs:
6 lbs of Live Rock
Penguin Mini BIO-Wheel Power Filter
2 x 15 watt Flourescent Tubes
Marine Sand
Thermometer
I also have a Marine Lab Test Kit made by Red Sea
I added a Raw Shrimp in the tank about 3 days ago. I did tests and the results came out as this.
Results:
Alkalinity = High
Ammonia = 5.0
pH = 8.4
Nitrite = 0.1-0.2
Nitrate = High Range - 25 Low Range - 5.0
I removed the Raw Shrimp after I took the test because I noticed it was bloating and smelled. Was this a good choice to remove the shrimp? Is there any problems with my results? If so, how can I improve them? Any other advice would help. Thanks