blfuller123
Member
I really hate to, but I need to get out of the hobby for a while. This tank was my current project to be built into the wall. My wife and I are now expecting our last child, so the fish have to take a back seat for awhile.
I have built everything here. The tank is all acrylic 0.75 thick cast material. The dimensions are 96x48x25. It has two external overflows that hold almost 5 gallons each. The overflows have 6 one inch drains with standpipes. The tank also has a single 1 inch hole drilled in the back bottom for draining the tank or doing water changes. The top is braced with 6 inch wide braces and has 4 holes for the water returns. The tank has no scratches at all on it. The tank has been full of water for a month now with fresh water for leak testing. I will drain it when someone comes to get it so they have no doubts of the tanks integerity.
I also have to go with the tank a 40 watt uv with a new bulb. I have a Sequence Manta Ray pump and Sequence Barracuda pump. I also have an XL 4 beckett recirculating skimmer that I also built. I have a 115 gallon glass tank that was going to be used as a sump. It is 6 feet long and doesnt have any baffles in it right now.
I will sell everything for $2K or the tank alone for $1500 OBO. No shipping!! I dont want to sell the skimmer, pumps and stuff without the tank being gone. I will probably end up keeping them if they dont sell with the tank. Serious inquires only please. My email is beefller@yahoo.com
Pictures of the tank:
Before Water
Just filled with water on Sept 22,2006. This is how it sits as of now.
One of the overflows just finished
Overflows with valves installed
Skimmer
Simmer in action
The build thread
http://www.reefcentral.com/forums/sh...5&pagenumber=1
I have built everything here. The tank is all acrylic 0.75 thick cast material. The dimensions are 96x48x25. It has two external overflows that hold almost 5 gallons each. The overflows have 6 one inch drains with standpipes. The tank also has a single 1 inch hole drilled in the back bottom for draining the tank or doing water changes. The top is braced with 6 inch wide braces and has 4 holes for the water returns. The tank has no scratches at all on it. The tank has been full of water for a month now with fresh water for leak testing. I will drain it when someone comes to get it so they have no doubts of the tanks integerity.
I also have to go with the tank a 40 watt uv with a new bulb. I have a Sequence Manta Ray pump and Sequence Barracuda pump. I also have an XL 4 beckett recirculating skimmer that I also built. I have a 115 gallon glass tank that was going to be used as a sump. It is 6 feet long and doesnt have any baffles in it right now.
I will sell everything for $2K or the tank alone for $1500 OBO. No shipping!! I dont want to sell the skimmer, pumps and stuff without the tank being gone. I will probably end up keeping them if they dont sell with the tank. Serious inquires only please. My email is beefller@yahoo.com
Pictures of the tank:
Before Water
Just filled with water on Sept 22,2006. This is how it sits as of now.
One of the overflows just finished
Overflows with valves installed
Skimmer
Simmer in action
The build thread
http://www.reefcentral.com/forums/sh...5&pagenumber=1
