Aquapod 24

[bpro32]

The stock pump pushes 240 gph so would adding another 150 gph be too much for just softies?

 

[subielover]

Add a koralia 1

 

[nissan577]

Originally Posted by subielover
http:///forum/post/2823390
Add a koralia 1

+1

 

[tang master]

+2

 

[bpro32]

Originally Posted by subielover
http:///forum/post/2823390
Add a koralia 1

I do have a spare k1 but 640 gph wouldn't be too much in a 24 gallon tank?

 

[nano-newb1983]

Nope I got my Stock Pump and a K1 and its perfect

 

[whisk]

Replace stock pump with Maxi-jet 1200 and also use a korailia 1 as well. Use the Y nozzle splitter on the return with MJ-1200. The flow is perfect and you will reach a lot of spots. I asked this same question not too long ago on here and this was the recommended setup for the AP 24. I would have to agree the flow is just right. Just dont stick a softie right in front of the flow.

 

[bpro32]

ok gotta bump this one...
everytime i turn on my k1, no matter where i point it, my xenia curls up and my button polyps close as well... Anything I can do or is that ok?

 

[nissan577]

were is it located?

 

[bpro32]

Originally Posted by nissan577
http:///forum/post/2826263
were is it located?
front right

 

[nissan577]

try moving it towads the back in the other side of the return pump. facing the middle

 

[bpro32]

Originally Posted by nissan577
http:///forum/post/2826288
try moving it towads the back in the other side of the return pump. facing the middle
my xenia is in the middle so i'm trying to avoid that. but i will try to move it to the back

 

[nissan577]

can you post a pic? then put it facing towards the front

 

[bpro32]

yeah i'll move it and then put one up

 

[nissan577]

okay! let us know how it goes

 

[bpro32]

ok I just moved the k1 and the xenia is still closing, not as much though. let me know what I should do...

 

[bpro32]

actually the xenia just opened up but the polyps look like an inside-out umbrella