Aquarium Lids

stanton

Member
Do you need to keep you aquarium glass top on?I was wondering about gas exchange and having the surface broken up with current....Just curious
 

aileena

Member
I do keep a glass top on one side of my 60g to slow down the water evaporation process. As it sits now it still loses between a half gallon and a gallon per day...The other side I leave topless for gas exchange...
 

beaslbob

Well-Known Member

Originally posted by Stanton
Do you need to keep you aquarium glass top on?I was wondering about gas exchange and having the surface broken up with current....Just curious

One of the real contradictions in this hobby is exactly what you are concerned about. We circulate the water to (among other things) increase the gass exchange and then put a lid on the tank to prevent evaporation. This in turn cuts down the gass exchange. In my fresh water 10g planted I have no circulation open top and lotsa plants. In my 20g macroalgae I have no circulation but in my 55g display with a filter I do have a top. the total evaporation of all three tanks is less than one gallon per week.
With a gallon and a half per day evaporation you must have a 1) much larger tank, 2) lots and lotsa circulation (and salt creep), 3) A much higher temperature than I am running (currently 82 or so). I am not advocating elimination of all your circulation, but there may be some middle ground where you could reduce the circulation, remove the lid, and have less evaporation with the same gass exchange. Hopefully you have a hood to prevent fish from jumping out of the tank. If not you could use some plastic window screen on the top. that would stop the fish jumping and allow gass exchange.
 
E

elan

Guest

Originally posted by JRein40806
If I took off the glass my pc's would get wet.What can be done about that?

just put the lights in their own enclosure..(make sure you circulate air in there or they might get too hot)
 

stanton

Member
How much surface aggitation?I can see a film on the top of the water.Which is why I was wondering about the lid being on the tank. I have a maxi jet 400 pointing directly at the surface breaking it up pretty good but I have not seen any improvement.I guess I need to go ahead and get my skimmer.
 
Top