benj2112
Member
Has anybody here ever gone through all the work of cooking their live rock? Or does anybody have any thoughts on this? I came across this idea yesterday as I was just browsing some fish sites.
This is what you need and how it works...(clipped from other site)
The purpose of "cooking" your rocks is to have tha bacteria consume all (or as much) organic material and PO4 stored on, and in, the rock as possible.
The first step to this is commitment.
You have to be willing to remove your rock from the tank.
It doesn't have to be all at once, but I feel if you are going to do this do it all. In stages if that is easier but make sure that all of it gets done.
The new environment you are creating for your rock is to take it from an algal driven to a bacterial driven system.
In order to this, the rock needs to be in total darkness to retard and eventually kill the algae's on the rock and to give the bacteria time to do the job.
So basically you need tubs to hold the rock.
Equipment needed.
1. Dedication.
2. Tubs to cook rock in. And an equal amount of tubs to hold the rock during waterchanges.
3. A few powerheads.
4. Plenty of buckets.
EDIT: 5. and some heaters to keep your water at the same temp as in your tank.
Steps...
1. Get into your head and accept the fact you will be making lots of salt water.
2. This process can take up to 2 months..
3. Setup a tub(s) where the rock is to be cooked.
4. Make up enough water to fill tub(s) about halfway and around 5-7 buckets about 60% full.
5. Remove all the rock you want to cook at this stage. (The rock can be removed piece by piece until you are done.) shutting off the circulation beforehand to minimize dust storms.
6. Take the first piece of rock and dunk it, swish it, very, very well in the first bucket. Then do it again in the 2nd bucket, then the third.
7. Place rock in the tub.
8. Repeat steps 6 & 7 to every piece of rock you want to cook at this time. The reason I suggested 5-7 buckets of water will be evident quickly...as the water quickly turnsq brown.
9. Place powerhead(s) in the tub and plug in. Position at least one powerhead so that it agitates the surface of the water pretty well. This is to keep the water oxygenated. You can use an air pump for additional oxygenation if you wish.
9. Cover the tub. Remember, we want total darkness.
10. Empty out buckets, restart circulation on main tank.
11. Wait.
12. During the first couple of weeks it is recommended to do a swishing and dunking of the rocks twice a week.
What this entails is to make up enough water to fill up those buckets and the tub the rock is in.
First, lay out your empty tub(s) and fill buckets the same as before.
Then, uncover tub with the rock in it. Take a rock and swish it in the tub it's in to knock any easy to get off junk.
Then, swish it thru the 3 buckets again, and place in the empty tub..
Repeat for all your rocks.
Then empty the tub that all the rocks were cooking in, take it outside and rinse it out with a hose.
Place tub back where it was, fill with new saltwater, add rocks and powerheads, and cover.
Wait again unti the next water change.
You will be utterly amazed at how much sand, silt, detrius is at the bottom of the tub and every bucket. It is amazing.
And a few last minute tidbits I remembered.
Your coralline will die back, receed etc. Now my rock is more porous for additional pods, mysids, worms etc. Coralline will grow back. Throughout this process the sponges, and pods on my rock have not died off. Everytime I do a waterchange they are there and plentiful.
This is what you need and how it works...(clipped from other site)
The purpose of "cooking" your rocks is to have tha bacteria consume all (or as much) organic material and PO4 stored on, and in, the rock as possible.
The first step to this is commitment.
You have to be willing to remove your rock from the tank.
It doesn't have to be all at once, but I feel if you are going to do this do it all. In stages if that is easier but make sure that all of it gets done.
The new environment you are creating for your rock is to take it from an algal driven to a bacterial driven system.
In order to this, the rock needs to be in total darkness to retard and eventually kill the algae's on the rock and to give the bacteria time to do the job.
So basically you need tubs to hold the rock.
Equipment needed.
1. Dedication.
2. Tubs to cook rock in. And an equal amount of tubs to hold the rock during waterchanges.
3. A few powerheads.
4. Plenty of buckets.
EDIT: 5. and some heaters to keep your water at the same temp as in your tank.
Steps...
1. Get into your head and accept the fact you will be making lots of salt water.
2. This process can take up to 2 months..
3. Setup a tub(s) where the rock is to be cooked.
4. Make up enough water to fill tub(s) about halfway and around 5-7 buckets about 60% full.
5. Remove all the rock you want to cook at this stage. (The rock can be removed piece by piece until you are done.) shutting off the circulation beforehand to minimize dust storms.
6. Take the first piece of rock and dunk it, swish it, very, very well in the first bucket. Then do it again in the 2nd bucket, then the third.
7. Place rock in the tub.
8. Repeat steps 6 & 7 to every piece of rock you want to cook at this time. The reason I suggested 5-7 buckets of water will be evident quickly...as the water quickly turnsq brown.
9. Place powerhead(s) in the tub and plug in. Position at least one powerhead so that it agitates the surface of the water pretty well. This is to keep the water oxygenated. You can use an air pump for additional oxygenation if you wish.
9. Cover the tub. Remember, we want total darkness.
10. Empty out buckets, restart circulation on main tank.
11. Wait.
12. During the first couple of weeks it is recommended to do a swishing and dunking of the rocks twice a week.
What this entails is to make up enough water to fill up those buckets and the tub the rock is in.
First, lay out your empty tub(s) and fill buckets the same as before.
Then, uncover tub with the rock in it. Take a rock and swish it in the tub it's in to knock any easy to get off junk.
Then, swish it thru the 3 buckets again, and place in the empty tub..
Repeat for all your rocks.
Then empty the tub that all the rocks were cooking in, take it outside and rinse it out with a hose.
Place tub back where it was, fill with new saltwater, add rocks and powerheads, and cover.
Wait again unti the next water change.
You will be utterly amazed at how much sand, silt, detrius is at the bottom of the tub and every bucket. It is amazing.
And a few last minute tidbits I remembered.
Your coralline will die back, receed etc. Now my rock is more porous for additional pods, mysids, worms etc. Coralline will grow back. Throughout this process the sponges, and pods on my rock have not died off. Everytime I do a waterchange they are there and plentiful.
