Cracked My 55 Gallon Tank - Bought a 90!

indymatt

Member
Okay, I drilled my 55 with no problems whatsoever no cracking no nothing. Today I was putting the bulkheads in and I tightened them tight. After they were on, I was test fitting the plumbing on the back and POP! glass cracked between bulkheads!
So I was pretty ticked to say the least! I was getting to the final stages of setup with the 55 and then it cracked. So I took off for the LFS to see about getting a replacement. While I was there I saw all the nice, new, bigger, shiny tanks and I got a 90! I have to widen my current stand and hood to accept the wider tank. No big deal, I am happy that I got it now rather than later. I already drilled it tonight for the bulkheads and will be make the stand and hood wider tomorrow. Good thing I bought all my equipment to handle a larger tank when I wanted to upgrade!
Here is a rundown of what I have:
ASM G2 Skimmer
2 - 300 Watt Titanium Heaters
Mag 5 for Sump Pump
Mag 9.5 For Closed Loop - Changing out to 12 for the needed increased flow
55 Gallon Tank Sump - Setup and can handle overflow water from the 90
IceCap 660 with 4 VHO Bulbs
So what I am getting at is that I had everything under control with the 55, then it cracked, I got awe struck at the LFS and bought the bigger tank and now what? I think all my equipment can handle the larger tank except for possibly the lighting. I plan on having a 4" DSB so actual tank depth will be 20". With that in mind and all my equipment listed can I have a reef tank consisting of LPS and Soft Corals? I can upgrade to MH later just not in the budget right now. Any other comments are welcome as well.
 

scsinet

Active Member
All the 55's I've ever seen have tempered bottoms. I'd consider it a miracle that you successfully got two holes drilled!
 
Top