acrylic51
Active Member
Using 1 1/2" drain shouldn't matter, not much real increase over using 1 1/4" for the drain. I would though however match my overflows the same. The 1 1/2" will just consume more room inside the overflow. That might be critical depending on standpipe an design.
On a side note the rate of flow over the overflow won't really dictate noise from the overflow itself. Where you pick the noise up is from the distance/height the water is dropping into the overflow.
On a side note the rate of flow over the overflow won't really dictate noise from the overflow itself. Where you pick the noise up is from the distance/height the water is dropping into the overflow.