M
mastino mike
Guest
krunk,
Thanx for the tip. This is my first time working with acrylic so where can I get weld-on? Do you think silicone will form a leak proof bond on acrylic? Their will be no tension on the silicone at all
the water pressure will help form the seal between the liner and the acrylic. If your saying that silicone doesnt adhere to acrylic at all I guess Ill be taking it back to the lfs.
Thanx for the tip. This is my first time working with acrylic so where can I get weld-on? Do you think silicone will form a leak proof bond on acrylic? Their will be no tension on the silicone at all
the water pressure will help form the seal between the liner and the acrylic. If your saying that silicone doesnt adhere to acrylic at all I guess Ill be taking it back to the lfs.
broncofish
Active Member
Nope silicon will not adhere.
broncofish
Active Member
Originally posted by KrUnK
sorry, dont know any place that sells weld-on. Ask broncofish.
http://www.usplastic.com/catalog/pro...Solvent+Cement
tony detroit
Active Member
Go to the broncofish link. Good place/supplier for any plastic/acrylic anything you need. I got the mail order catalog, they got everything.
Hey Danny how's my bike running?
Hey Danny how's my bike running?
D
daniel411
Guest
Running pretty slow! What do you have to keep the rpm's at? I was on the highway, went to pass someone in sixth, and well... it took awhile to pass! lol... ya need a 1000! Never thought I'd say that!
tony detroit
Active Member
You try crossover wheelies on it yet???
If you do that grip tape I put on the tank helps mucho. Just make sure you hold the bars tight when you come back down. Take it easy I'm gonna try and sell that soon.
When you gettin off work?
If you do that grip tape I put on the tank helps mucho. Just make sure you hold the bars tight when you come back down. Take it easy I'm gonna try and sell that soon.
When you gettin off work?
D
daniel411
Guest
LOL, not yet.... I played on 26 mile, had to bounce like mad to try and lift in 2nd!!! Would barely start coming up before I backed off. Won't drop it though, sucks... couldn't get my new rear tire saturday because of the outage. Don't trust if for that long of a drive. Should be in novi by 5pm
tony detroit
Active Member
My jeep's outta comission. Tie rod ends are kaputt. Taking home a company pickup today.
D
daniel411
Guest
ouch, you didn't crash or anything did you?
tony detroit
Active Member
no, just old, beat up
Are you working around the clock this week?
Are you working around the clock this week?
krux
Member
make sure you have a circuit in the area you are setting it up rated high enough to hold all the pumps and what not. i am ballancing that problem now as i set up my next tank. i am going to nee dto run extension cords to another room so that i can get a couple higher amp items on another circuit for safety reasons.
otherwise sounds like a fun project. i know a guy with a 500, and it is awesome to watch. the depth makes a lot of difference, i am sure you will love it.
otherwise sounds like a fun project. i know a guy with a 500, and it is awesome to watch. the depth makes a lot of difference, i am sure you will love it.
D
daniel411
Guest
I work with a bunch of electricians, already planning on rewireing the living room for it 
Might as well do it right the first time. What does your friend have in his 500? Livestock, powerheads, lighting, etc. ?
Might as well do it right the first time. What does your friend have in his 500? Livestock, powerheads, lighting, etc. ?
slothy
Active Member
Originally posted by tony detroit
You try crossover wheelies on it yet???
If you do that grip tape I put on the tank helps mucho. Just make sure you hold the bars tight when you come back down. Take it easy I'm gonna try and sell that soon.
When you gettin off work?
Wheelies are bad !! lol
slothy
Active Member
Originally posted by tony detroit
You try crossover wheelies on it yet???
If you do that grip tape I put on the tank helps mucho. Just make sure you hold the bars tight when you come back down. Take it easy I'm gonna try and sell that soon.
When you gettin off work?
All that grip tape is gonna do it put holes in your jeans... just do a few crossed up stoppies and that tank will be customed formed to your arse
D
daniel411
Guest
Originally posted by slothy
All that grip tape is gonna do it put holes in your jeans... just do a few crossed up stoppies and that tank will be customed formed to your arse
Can't be anyworse to jeans than a kids dirtbike, a few beers, me, and subdivision ditch leading to pavement
Any luck with your bike, slothy?
D
daniel411
Guest
okay, actually I don't think beer played much into the equation. Not sure if thats a sad thing lol.
slothy
Active Member
Originally posted by Daniel411
okay, actually I don't think beer played much into the equation. Not sure if thats a sad thing lol.
well waiting on paper work from them, then i gota send that, police report, and reciepts for pipe/undertail/damper.. crossing my fingers right now