Durso ?

[fishy7]

This weekend, I made my own durso pipes but not sure how big to make the whole on the top? I'm sure it makes a difference.
The pipes will be 3' tall and they are made with a 1 1/2" T, Elbow and a cap.
Thanks for your help.

 

[crimzy]

Originally Posted by FISHY7
http:///forum/post/2749846
This weekend, I made my own durso pipes but not sure how big to make the whole on the top? I'm sure it makes a difference.
The pipes will be 3' tall and they are made with a 1 1/2" T, Elbow and a cap.
Thanks for your help.
A drill?? That's how I did mine.

 

[cranberry]

I drilled 2 holes big enough to take 2 rigid airline tubings. Then I attach regular tubing and an air valve to fine tune them. Usually I end up leaving one side open and I adjust the other.

 

[fishy7]

Thanks guys for the help!

 

[seltzerd]

You can drill a hole in the SIDE of a cap you put on the top. Drill through the cap and pipe. You can then adjust your air by turning the cap so less of the holes overlap and the opening is smaller