fraging help!!!

sharkbait09

sharkbait09

Member
hello,
i have a frogspawn and a leather toadstool and i was wondering if they r big enough to be fragged???
leather-1 credit card high 1/2 credit card left/right
frogspawn- about 7 heads
and if i can how and as detailed as possible(not verry smart)
thankyou!!!!
 
jackri

jackri

Active Member
Pictures would help but both are very easily fragged. I just cut around the outer rim of my toadstool with my scissors (special fragging one) and cut it into 1/2 - 1 inch pieces and glue them on a plug... they'll grow a stalk and become babies.
The frogspawn... just use a side cutter/bone cutter and cut the heads apart -- just don't cut any fleshy or live area -- just the dead looking structure.
 
sharkbait09

sharkbait09

Member
okay thanx i have to wait a while to get a pic till hes all the way opend up and you dont do anything else to the frogspawn just vleave him like that?
thankhyou
 
loopy101

loopy101

Member
Originally Posted by jackri
http:///forum/post/3076310
The frogspawn... just use a side cutter/bone cutter and cut the heads apart -- just don't cut any fleshy or live area -- just the dead looking structure.
+1
pictures would be great! but i use a dremal for cutting the heads off of these types of corals both will work well. and to answer your last question take some epoxy i use JB waterweld there are other epoxies that will work and prolly cheaper as well. but just epoxy it to a plug or to a piece of live rock and you should be good to go!
 
bill109

bill109

Active Member
utube frogspawn fragging. should be some guy with a southern accent fragging a frogspawn on u tube.
it shows him with chicken shears and hes just cutting them. i used them as well. they work nicely.
 
jackri

jackri

Active Member
I wouldn't frag your toadstool yet.. it's pretty small. Mine has a good 8 inch diameter on it and it's bowing over so I take bits off the side and yet keep its round shape.
 
You must log in or register to reply here.
Top