Help need expert nano retrofiters!

55galgill

Member
well i just plumbed my refugium to my main tank(its a gravity feed) my question is my refugium is a ECLIPSE SYSTEM 6 what i want to do is retrofit a small pc lamp in there .have any of you guys done this. and is it possible?if it is i kinda need detailed instructions because i am a noob at anything with lighting.thanks in advance~Gill~
 

55galgill

Member
tuningvis
nope its located above my tank and gravity pulls the water down into my main disply.that way all my pods and critter dont have to pass thru a pump motor.
 
T

tuningvis

Guest
have you thought about hanging a light from your ceiling
 

55galgill

Member
tuningvis
well the tank is kinda small for that its a eclipse system 6 six gallon aquarium ideally i want to retofit a light into the existing hood canopy that came with it. i have heard of people doing it to eclipse 12's
 
T

tuningvis

Guest
what is the dimensions of the tank
you could try a coralife 96w quad pin 50/50 setup
with the legs you could runs the pipes under the legs
 
T

tuningvis

Guest
the light is 20" but the legs can be moved along rails that are on the light so you can shorten it to the size you need
 

55galgill

Member
carl how is your evaporation? see i wanna keep mine to a gallon a day so i was avoiding getting rid of another hood.
what light did u get??
 

carl_in_fl

New Member
I took the flap intitially so i could drop the plumbing in. My evap is about a gallon a day but i think because i have a fan flowing on the main tank and a mag 7 in the sump. I am going to get the pump out of the sump and see what happens.
Carl
 

gfk

Member
sent.... how are you making it a refugum?
i had an eclipse 12 and also a 10 gallon that arent used, and i would think about using either for added filtration on my 20h if its easy inexpensive and possible
 

55galgill

Member
gfk
i did a water fall design. i have my 55 gallon on top of my dresser and my sistem six is on a box that makes the system 6 about 4 inches taller than my 55 gallon.there is a pump in the 55(rio190 i think) that pumps water out to the system 6. i drilled a 1 inch hole on the side of the refugium and placed a bulkhead there. next i ran tubing to a ball valve and then to a 90 degre elbow that flows the water into my main display if you want a picture to better see what i mean i can try and post one tomorrow its really simple and none of your pods get beat up either !
 
Top