E
elan
Guest
here is the new tank.
Tank Height = 20"
Tank Width = 15"
Tank Length = 36 "
Approximate Gallons = 47
i havent tried cleaning it up yet, because i am unsure how to do that without scratching the acrylic. Any suggestions?
The only problem i see is that the return is as follows...
If looking at the second pic (the back pic), a powerhead goes on the left side.. about half way up... (very hard to see) there is a tube (also black and hard to see) that runs down to the bottom and then to the right.. about half way of the tank... There are small holes on the other side running the whole span of the return tube... therefore, i will have water inflow about 1 inch from the bottom of the tank. I gather this may be very difficult to establish a DSB...
Other than that, the tank looks great.. neatly built in wet dry, with no cracks or stresses.
any thoughts would be great.
thanks
Tank Height = 20"
Tank Width = 15"
Tank Length = 36 "
Approximate Gallons = 47
i havent tried cleaning it up yet, because i am unsure how to do that without scratching the acrylic. Any suggestions?
The only problem i see is that the return is as follows...
If looking at the second pic (the back pic), a powerhead goes on the left side.. about half way up... (very hard to see) there is a tube (also black and hard to see) that runs down to the bottom and then to the right.. about half way of the tank... There are small holes on the other side running the whole span of the return tube... therefore, i will have water inflow about 1 inch from the bottom of the tank. I gather this may be very difficult to establish a DSB...
Other than that, the tank looks great.. neatly built in wet dry, with no cracks or stresses.
any thoughts would be great.
thanks