Lowest cost and easiest way to eliminate green hair, bubble, turf and slime algae from your aquarium (hopefully permanently).

DAZEUPONME

New Member
Quote:
Originally Posted by SantaMonica
Yes if you put a screen above some bubbles, you will get the simplest form of a UAS (see page 1).
Such was my thinking.... I'm no use with power tools...any idea what what else I could use to ruff up the surface of the plastic grid?
A heavy grit sanding block would work
 

santamonica

Member
Well yes it does help, and is better than smooth. But a wood saw blade really gives you the cut-up roughness that is best. Also you can tie some nylon strings to the screen.
 

santamonica

Member
Shade cloth:

All new scrubbers which use white growth surfaces should have a black cloth placed over some of the LEDs for the first week or two. Because the all-white ******** reflects so much light, when it is new the light levels are way above the highest amount that can grow anything. Once growth starts, the white surfaces get covered with growth and the total light levels drop, and the cloth can be removed. Any cloth, stocking, or t-shirt can work; just don't melt the cloth with hot LEDs :)

This covering of the lights can be done by anyone, on any scrubber, even waterfalls. Waterfalls use plastic canvas which has more holes than material, and they are not in white compartments, so the light levels when new are not that high. But it still might help if a new screen stays completely empty or had bald spots.

The reason for a white colors, of course, is too allow more light to reach the base of the growth that does the attaching to the surfaces. As the growth gets thicker, the bottom layers will almost be in darkness, so the white surface doubles the light there by reflecting instead of absorbing the light.

Put the shade cloth about 2/3 or 3/4 over the lights; this way you can see which part grows better: the covered, or uncovered.
 

santamonica

Member
Scrubbers compared to refugiums

If you are starting a new tank, then the obvious difference is that a scrubber gives you the option of not having a fuge at all. There are other uses for a sump/fuge of course, but we'll only cover the filtration concerns here.

A not-so-obvious difference of scrubbers compared to refugiums is that a scrubber, if run with a fuge with macros, will kill the macros even though the macros are much larger. This is because the scrubber thinks the macros are nuisance algae. Some people do run both together without killing the macros, but this is because their scrubber is not strong enough, and actually the macro might even be slowing down the scrubber because the scrubber thinks it has to remove the macro, along with the nutrients in the water, and the nuisance algae in the display too.

But assuming you have to decide on either a fuge or a scrubber (not both)...

o Filtration with algae is proportional photosynthesis, which is proportional to light X air water turbulent flow X attachment. Meaning, stronger light grows more algae; stronger air/water interface turbulence grows more algae; and stronger attachment lets more algae grow without detaching and floating away. A scrubber is thus designed to maximize Light, Turbulence, and Attachment.

o The main problem with macros in a refugium is the self-shading that the macros do. Any part of the macro which is not directly in front of the light at any moment is not filtering much. And any macro inside of a "ball" of macro (like chaeto) is self-shaded all the time. Only the surface macro that is directly in front of the light is doing any real filtering. A scrubber is designed to have all the algae in front of the light at all times. Rotating macro does not solve the problem because the time that the macro is rotated away from the light is time that the macro is not filtering. This is why it takes a much larger size of chaeto to do the same filtering as a scrubber, and why a scrubber will kill macro.

o Self-flow-blocking is another problem of macros in a refugium, for the same reason as light-blocking. And the thicker the "ball" of macro, the worse the flow-blocking becomes. A ball of macro that stays the same size is doing no filtering.

o Particle trapping is another result of a ball of macro. These particles need to cycle back around to feed the corals, but instead they get trapped in the macro and rot, and in doing so they block even more flow and light.

o With a scrubber, there is very little water standing in the way of the light. Also, the light is (or should be) very close to the scrubber... 4 inches (10cm) or less. The power of light varies with the inverse square of the distance, so going from 8" to 4" actually gives you 4X the power, not 2X. And the nutrient removal power of algae is proportional to the power of the light, because it's the photosynthesis that is doing the filtering.

o Rapid flow across the algae in a scrubber gives more delivery of nutrients, compared to the slow moving water in a fuge. Filtering is proportion to nutrient going into and out of the surface of the algae.

o The turbulence of water moving over the sections of algae in a scrubber helps to remove the boundary layer of water around the algae. This boundary layer slows the transfer of metabolites in and out of the algae. There is no turbulence in a fuge (if there were, you'd have waves and bubbles). The interface between the air and water is what provides the most turbulence and boundary layer removal; there is no air/water interface in macros. Turbulence is provided by bubbles, or waterfalls, or splashes.

o Scrubbers do not let food particles settle and rot like a refugium does; most particles flow right out of the scrubber.

o Scrubbers do not (if cleaned properly) release algal strands into display, like chaeto does.

o Scrubbers do not go sexual, like caulerpa can.

o Scrubbers do grow lots of pods; more than was previously thought, especially if not cleaned with freshwater.

o Scrubbers don't, obviously, provide a place for snails and crabs, etc.

However, if you already have a sump with an empty compartment, and you don't mind using all of it and putting a light over it, then maybe it's easier and cheaper to try macros first.
 
Top