I just filled my 12 gallon nano with water and the filter is making a loud noise. Is normal?
oak Member Apr 7, 2007 #1 I just filled my 12 gallon nano with water and the filter is making a loud noise. Is normal?
huskerreefer Member Apr 7, 2007 #2 If its a wet/dry set-up there will be some noise as the water trickles over the bio-balls.
oak Member Apr 7, 2007 #3 It's not and also are you supose to run the filter after you put the sand in?
crt81 Member Apr 7, 2007 #4 Is it filled so that the pump is sumbmersed and if not that could be the reason why it's making the noise it's making.
Is it filled so that the pump is sumbmersed and if not that could be the reason why it's making the noise it's making.
gregzbobo Member Apr 8, 2007 #6 take the pump out, disassemble it, check for debris, clean it if needed, and carefully reassemble it. Sometimes just disassembling then reassembling a powerhead type pump will cure noise.
take the pump out, disassemble it, check for debris, clean it if needed, and carefully reassemble it. Sometimes just disassembling then reassembling a powerhead type pump will cure noise.
