ok, i'm an (rodi) idiot

[dmjordan]

i can see where the water conects to the (in) line and i see where the out spot on the other side. on top there is a set of tubes and connections that also has a spot for lines to connect on each side... what goes where??? anyone have any pics or drawings on what lines connect to what? it is a typhoon iii

 

[sign guy]

you should have a in bad out and good out, the out line that flow's the slowest is your good line

 

[dmjordan]

if you look at the pic above you can see an out line at the top left of the di cartridge. on the right side at the top right of the canister there is an in line. on the top of the unit by the membrane there is a blue ball valve where a line can go in and then on the right side there is another place to connect a line.

 

[sign guy]

probably a place to add extra canisters ,can you post a larger pic?

 

[dmjordan]

got this pic from airwaterice

 

[sign guy]

is this the unit you have?

 

[dmjordan]

yes, thats the one...typhoon iii. mine doesn't have those tags on it though.

 

[sign guy]

it looks like the valves are not hooked up to anything

 

[dmjordan]

got it hooked up and it has been running for about 2 hours now with the good water line dumping water down the drain. in about another hour or two it should be good to go.

 

[sign guy]

be careful I blew the gasket in my sink cuz my water presure was to high

 

[dmjordan]

i need to buy a pressure gauge just to be safe.

 

[sign guy]

where can you get one?

 

[dmjordan]

you can get them at the local hardwarestore or online

 

[sidd]

http://www.thefilterguys.biz/five_st...-di_system.htm