Originally Posted by
NewB2nano
http:///forum/post/2833912
On the wiring on the RSM how does that plug in? Are the lights on a diff cord than the pump?
Each wire has it's own switch... there's a cluster of switches all together on the right back side of the tank.
From top to bottom, these are individual switches that you see...
1. Lights
2. Skimmer
3. heater
4. Powerhead 1
5. Powerhead 2
And there's a single cord that comes out the side for you to plug in. Pic 1 and 2 (below) are of the switches with the door open and shut. Note the single electrical cord that comes out the bottom. That's the one you plug into the wall.
The third pic is of the timer on the back top of the tank... You can set it to control when the lights go on and off. The timer has a 3-way switch in the middle of the timer dial that can allow you to override the timers light schedule whenever you need, allowing you to choose to keep the lights always off, always on, or whatever the timer is set for. The switch next to the timer is for the moon lighting, which are never on when the main lights are on.
As you can see, it's a truly excellent all-in-one system... they really thought of everything.