seaclone skimmer
- Thread starter louny
- Start date
dirtybilge
Member
Slow the flow down, turn the air nob on the air hose.
deucey
Member
Hey LouNY if you want to gain better control of your air supply you could take the original air valve assembly off and put a plastic air valve in its place....it only costs like a dallar for two of these valves and they really do help you gain control.....just a thought.....might want to give it a try.....if you want more info just let me know....
bmf_52
New Member
I've had the same problems as you are. I think I've finally got the air set just right. To get rid of the bubbles in your tank I put a piece of foam in the outlet and I have no more bubbles in the tank.
I bought A foam block #2 for a Hagen Filter I think. Cut it to be just a little longer the black spillway. Then cut a slit in the side of the foam and slipped it over the spillway. Hope this helps.
I bought A foam block #2 for a Hagen Filter I think. Cut it to be just a little longer the black spillway. Then cut a slit in the side of the foam and slipped it over the spillway. Hope this helps.
bmf_52
New Member
I've had the same problems as you are. I think I've finally got the air set just right. To get rid of the bubbles in your tank I put a piece of foam in the outlet and I have no more bubbles in the tank.
I bought A foam block #2 for a Hagen Filter I think. Cut it to be just a little longer the black spillway. Then cut a slit in the side of the foam and slipped it over the spillway. Hope this helps.
I bought A foam block #2 for a Hagen Filter I think. Cut it to be just a little longer the black spillway. Then cut a slit in the side of the foam and slipped it over the spillway. Hope this helps.
bmf_52
New Member
I've had the same problems as you are. I think I've finally got the air set just right. To get rid of the bubbles in your tank I put a piece of foam in the outlet and I have no more bubbles in the tank.
I bought A foam block #2 for a Hagen Filter I think. Cut it to be just a little longer the black spillway. Then cut a slit in the side of the foam and slipped it over the spillway. Hope this helps.
I bought A foam block #2 for a Hagen Filter I think. Cut it to be just a little longer the black spillway. Then cut a slit in the side of the foam and slipped it over the spillway. Hope this helps.