alfieferenzo84
Member
So i bought 3 different brands of most test. I am amazed at how different the results are from the same water at the same time. Tank water. Been up and running for 6 mo. Just did a 30% water change 3 days ago.
Ph Api- 8.3, Red sea- 8.2
Alk only red sea test in middle 1.7-2.8?
Nitrite - Api 0, Red Sea- 0.1, Salifert - 0
Ammonia- Api .25, Red sea 0 But after 15 min it was not readable like the directions tell you to wait. Salifert- <.25 lowest
Nitrate - Api 5, Red Sea 2.5, Salifert 25
So then i took a gallon of fresh ro/di water mixed half cup of salt 1.023 and redid the test and below is what i got.
Ph Api- 8.2, Red sea- 8.2
Alk 1.7-2.8 Middle again
Nitrite - Api 0, Red Sea- 0.1, Salifert - 0
Ammonia- Api .25, Red sea 0 But after 15 min it was .25 this time.... Salifert- <.25 lowest
Nitrate - Api 0, Red Sea 0, Salifert 10
My ro/di unit claims to be putting zero tds out, I just changed all the filters last week. ALL OF THEM.
I use instant ocean salt and just bought 4 bags last week so its not old or anything if it even goes bad?
Now to really throw you off i did a ammonia and Nitrite test with just ro/di water not sure if there correct without salt but i got the below readings.
Ammonia- Api 0, Red sea 0 But after 15 min it was .25 this time.... Salifert- <.25 lowest
Nitrite - Api 0, Red Sea- 0.1, Salifert - 0 Same as before.
Nitrate - Api 0, Red Sea 0, Salifert 10
So you can see there is a little difference in the test. What do you all think? What test kits do you use? Id like to know what my water really is not a guess...
Ph Api- 8.3, Red sea- 8.2
Alk only red sea test in middle 1.7-2.8?
Nitrite - Api 0, Red Sea- 0.1, Salifert - 0
Ammonia- Api .25, Red sea 0 But after 15 min it was not readable like the directions tell you to wait. Salifert- <.25 lowest
Nitrate - Api 5, Red Sea 2.5, Salifert 25
So then i took a gallon of fresh ro/di water mixed half cup of salt 1.023 and redid the test and below is what i got.
Ph Api- 8.2, Red sea- 8.2
Alk 1.7-2.8 Middle again
Nitrite - Api 0, Red Sea- 0.1, Salifert - 0
Ammonia- Api .25, Red sea 0 But after 15 min it was .25 this time.... Salifert- <.25 lowest
Nitrate - Api 0, Red Sea 0, Salifert 10
My ro/di unit claims to be putting zero tds out, I just changed all the filters last week. ALL OF THEM.
I use instant ocean salt and just bought 4 bags last week so its not old or anything if it even goes bad?
Now to really throw you off i did a ammonia and Nitrite test with just ro/di water not sure if there correct without salt but i got the below readings.
Ammonia- Api 0, Red sea 0 But after 15 min it was .25 this time.... Salifert- <.25 lowest
Nitrite - Api 0, Red Sea- 0.1, Salifert - 0 Same as before.
Nitrate - Api 0, Red Sea 0, Salifert 10
So you can see there is a little difference in the test. What do you all think? What test kits do you use? Id like to know what my water really is not a guess...