waste/detritus

streetdoc

Member
I was wondering what everyone does to prevent the build up solid wastes in their LR and reef tanks. I am getting my first 100lbs of LR soon and would prefer to set things up right the first time. I currently have aCC bed and have noticed some people have nothing for a bottom. Any advise would be appreciated.
Thanks, Alan
 

nacl-man

Member
2 words: water movement.
IMO the more water movement you have the longer waste is suspended in the air, thus it never settles and eventually gets removed via skimmer or mechanical filtration, ect...
I've got a power head blowing behind my LR to keep stuff from settling back there.
hope this helps.
 

razoreqx

Active Member
If your bacteria levels are good enough it should weight your substrate down... I do the same with PH's.. I have them blasting in , out and around my LR..
 

nacl-man

Member
it should be within reason.... if you have a 55 gallon tank you shouldn't install 8 1200 GPH power heads :)
Shoot for about 15x turnover and you will be ok IMO. Then you just play with the outputs until you get what you want.
 
Top