vcreefer26
Member
:jumping: Say good bye 70 gallon HELLO 200 reef. Tonight I started on my lastest project which is a 200 gallon tall tank that measures 60x24x30. The filter system will be a double sump with a fuge and a EuroReef protien skimmer with a Iwaki 70 for a return pump. I also be running a 1/4th chiller to keep the water cool from the MH's and VHO's. Lighting with be 4x175 10k MH's and 2x140 atinic VH's also there will be 24 LED's for the moonlights. All the lighting, pumps, heating and chilling will be controlled by a Reefkeeper 2.
This is going to be a huge project since I am going to have to remove all the paneling from the walls first, then make a 6 foot hole in the wall to get access to the back of the tank and then frame and drywall everything. And I am going to be learning most of everything as I go. If you have any advice please let me know.
To let you know what is going on here picture #1 is the 200 gallon tank that I am going to use. #2 is where i am going to cut a hole in the wall for the access for the tank and all the filter systems are going in that room. #3 is where the tank is going to be built into the wall.
This is going to be a huge project since I am going to have to remove all the paneling from the walls first, then make a 6 foot hole in the wall to get access to the back of the tank and then frame and drywall everything. And I am going to be learning most of everything as I go. If you have any advice please let me know.
To let you know what is going on here picture #1 is the 200 gallon tank that I am going to use. #2 is where i am going to cut a hole in the wall for the access for the tank and all the filter systems are going in that room. #3 is where the tank is going to be built into the wall.