Big Trouble Help Quick!!!

reefnutpa

reefnutpa

Member
Aqueon (which was formerly AGA) has a lifetime warranty on tanks 65 gal and above. This is also stated on their website somewhere. Have you contacted Aqueon for a replacement?
Tom
 
9supratt4

9supratt4

Active Member
Originally Posted by ReefNutPA
http:///forum/post/3156926
Aqueon (which was formerly AGA) has a lifetime warranty on tanks 65 gal and above. This is also stated on their website somewhere. Have you contacted Aqueon for a replacement?
Tom
Unfortunately I bought this used and the guy I bought it from hasn't been able to find the receipt, so i'm pretty much beat on a warranty.
 
salami trigger

salami trigger

Member
SO sorry for ur troubles...
When u say u measured stand with a t square was that when the tank was Empty or still FILLED?
And did the tank ever actually leak.
 
9supratt4

9supratt4

Active Member
Originally Posted by SALAMI TRIGGER
http:///forum/post/3157448
SO sorry for ur troubles...
When u say u measured stand with a t square was that when the tank was Empty or still FILLED?
And did the tank ever actually leak.
Empty. And no it SURPRISINGLY never leaked!! You thinking that the weight of the tank when full may be bowing the stand??
 
9supratt4

9supratt4

Active Member
Originally Posted by SALAMI TRIGGER
http:///forum/post/3157454
Thats what Im thinking...is the tank off the stand now?
Yes.....what i'll do is check it once the new tank is here and full of water...before I mix in the salt. But good call on checking that!!
 
salami trigger

salami trigger

Member
I would get a 6 foot level...check the sides for from the top to see if it level around..also take ur t square...one for cutting sheetrock would be great..put it along the top edges to see if they are flat with no hills or dips.
Just playin Devil's advocate here but....u say u bot tank used..are u sure this crack was never there before?
 
9supratt4

9supratt4

Active Member
Originally Posted by SALAMI TRIGGER
http:///forum/post/3157459
I would get a 6 foot level...check the sides for from the top to see if it level around..also take ur t square...one for cutting sheetrock would be great..put it along the top edges to see if they are flat with no hills or dips.
Just playin Devil's advocate here but....u say u bot tank used..are u sure this crack was never there before?
I just checked the stand again...actually myself and someone else and the stand is definitely level...no doubt about that!! To be honest....no I didn't check the bottom of the tank when I bought it.
 
salami trigger

salami trigger

Member
That could be good...crack mite have been there so its not the stand..less worry about the new tank now.....Oh Yea..now...fix the old ..make a cynderblock stand....Oh yea!! 1 more tank in the garage!!
Love it when things work out like THAT!
 
9supratt4

9supratt4

Active Member
I started a new thread in the Reef Section about my rebuild....check it out here: https://forums.saltwaterfish.com/t/367690/the-rebuild-of-my-180-begins-and-continues/20#post_3163298
 
You must log in or register to reply here.
Top