tdog7879
Member
Thanks for reading this thread : I have a little problem with cyano (red slime) and im trying to figure out why it keeps on coming back. My tank seems to get it in small little patches only on the SB which is a DSB. About 3 weeks ago i had the same problem, so i went and got CHEMICLEAN and it clean it all up! But now it is back. So what am i doing wrong? My tank is a 80 gal tall with a 5 inch DSB.ONly 2 inches of the DSB is live sand rest is playsand. I have about 65-70lbs of live rock. MY FISH: yellow tang, blue jaw, 2 cinamin clowns , green chromis,bar goby, yellow face goby. I have a cleaner and a peperment shrimp and feather dusters. I also have a mix of zoas,mushrooms and a frogspawn.CUC: 25-30 snails and hermets.
MY EQUIP: 700 GPH WET/DRY, AQUA CLEAR HOB, PRIZM PRO SKIMMER(300 GPH) MAXI JET 1200 GPH AND A KORALLIA # 2.
WATER: PH 8.3 NITRITE 0 AMMONIA 0 NITRATE 0 PHOSPHATES 0 CALCIUM 410 ALK. 2.9 MEG SPECIFIC GRAVITY 36
LIGHT: 216 WATTS T-5 they sit right on top of the tank which leave about 3 inches of open tank i also have a desk fan that blows on light to keep the temp. at 80degrees. LIGHT CYCLE is on from 8am - 5pm. There is a window in the room so the tank gets a little bit of light after lights go out.
Couple more things?(sorry)
The korlia is about 5 inches from SB where cyano is??
Should i change the light cycle because the light(sunset) from window enters is where cyano is???? OR is the DSB a problem? Also in the morning it is almost non visble.?SORRY FOR LONG THREAD JUST WANTED TO GIVE ALOT OF DETAILS!!! THANKS AGAIN T-DOG
MY EQUIP: 700 GPH WET/DRY, AQUA CLEAR HOB, PRIZM PRO SKIMMER(300 GPH) MAXI JET 1200 GPH AND A KORALLIA # 2.
WATER: PH 8.3 NITRITE 0 AMMONIA 0 NITRATE 0 PHOSPHATES 0 CALCIUM 410 ALK. 2.9 MEG SPECIFIC GRAVITY 36
LIGHT: 216 WATTS T-5 they sit right on top of the tank which leave about 3 inches of open tank i also have a desk fan that blows on light to keep the temp. at 80degrees. LIGHT CYCLE is on from 8am - 5pm. There is a window in the room so the tank gets a little bit of light after lights go out.
Couple more things?(sorry)
The korlia is about 5 inches from SB where cyano is??
Should i change the light cycle because the light(sunset) from window enters is where cyano is???? OR is the DSB a problem? Also in the morning it is almost non visble.?SORRY FOR LONG THREAD JUST WANTED TO GIVE ALOT OF DETAILS!!! THANKS AGAIN T-DOG