mjordan23
Member
I just built a custom stand for my new 125 Oceanic Tank. I looked on this board and came up with a plan...My frame is built out of 2x4s and 2x6s. The top frame is made out of 2x6s stripped by a table saw down to 2x5 so that it would be perfectly straight. There is also 1in x5in finishwood on on the top screwed and glued down. Everything is screwed by deck nails and liquid nails. I just filled the tank up 1/2 to make sure everything is ok. There is one problem. There is a lil gap about 1/32in from the tank stand and the bottom of the fish tank (oceanics cherry plastic frame). It is perfectly flush at the ends but in the front middle there is that lil gap of 1/32in. Maybe it is just the way the plastic frame was glued to the tank? Everything is perfectly level. I need help. Is this a problem or do you guys feel it will find itself filled all the way up? Please help.....suggestions needed and appreciated.
Here is a pic of tank and stand.
Thanks
Here is a pic of tank and stand.
Thanks