I Figured Out Where My Calcium is Going

squidd

Active Member
I "noticed something the other day, when I took the "third" pic for an Acro ID...
The Lowly Stag...Purchased...9/24/04...
 

squidd

Active Member
No C-reactor ...YET..but I'm collecting pieces and will be putting one together soon...
Was dripping Kalk in a "softie" tank and holding high/fine and forever...
Then lately switched toward SPS and had to start "doseing" heavy and regular...Added a K-reactor to take up some "slack...But Still need to dose couple times a week to stay in a "normal/low" range, much less "push" anything...
 

bang guy

Moderator
Ver nice growth Squidd!
Don't throw away the K reactor when you get the Calcium reactor going. They work best together.
 

squidd

Active Member
Yep, that's what I've been using..
Kent's Turbo Calcium, SuperBuffer DKH, Turbo Stronium, and the Mag I get from epsom salts...
 

squidd

Active Member

Originally posted by Bang Guy
...Don't throw away the K reactor when you get the Calcium reactor going...

I never throw anything away....:D
 

bang guy

Moderator

Originally posted by Squidd
the Mag I get from epsom salts...

If you're adding a significant amount of Epsom Salt you can easily OD on Sulfate. It's fine for small bumps a couple/few times a year but for regular dosing I would suggest Magnesium chloride or a 10:1 mix of Magnesium chloride & Epsom Salt.
 

squidd

Active Member
I think my Mag levels stay pretty stable due to regular partial WCs..I think I used a couple Tbs. when I first set up the tank and haven't added any more than 3-4 since then...
Just to "bump" it a bit from 1250 to 1300...
I think if I had to add it "regularly" I'd switch to a cleaner product...
 

squidd

Active Member
Don't ask me...I use Epsom Salts...(Magnesium Sulfide)... :rolleyes:
I think I paid 99cents for a 4 lb bag two years ago...:D
But...Read the "concerns" above....:yes:
 

thedude

Member

Yep, that's what I've been using.. Kent's Turbo Calcium, SuperBuffer DKH, Turbo Stronium, and the Mag I get from epsom salts...

Squidd, when using all of these additives together, do you mix them all at full strength or do you have to compensate? (sorry if this is a noob-ish question) :notsure:
 

squidd

Active Member
Each is dosed individually, according to the "needs" of the tank, determined by testing levels and charting rate of consumption....
Sometimes more, sometimes less, sometimes not at all...Depends on what the TESTING
says the tank "needs"...:yes:
Never "just cause I "feel" like it"...or because someone "told" me I needed it...:nope:
I never, ever, ever, walk up to the tank and say...
"I think I'll throw a couple scoops of "UNOBTANIUM" in there today...I "heard" that's good stuff"....
 

thedude

Member
lol...i knew ide end up sounding like a noob :)
I guess thats pretty important...dont add something you can't test for (or havn't tested for)...I just read that in another thread, seems to be todays theme (I learn something every day:D )
ok I need to go to sleep...im officially addicted to the 'dern website :sleepy:
 
Top