1boatnut
Member
It looks as though my long tenacle plate coral split on the outer edgr inward about 1/2"
Although lousy,I attached a picture.If you look at the front of the coral a little to the right, you can see the split. Also lying on the sand righ in front of the split seems to be part of the coral.
The 2nd picture is what it looked like about a week ago
I have had this coral for around 30 days or so. It was doing fine. Swelling up huge and the tenacles reached way out. I did however move it from the middle of the tank to the left corner.Light would not have changed,but flow might.Now it opens more at night when the lights are off.Although it still opens after the lights come on,after about 6hrs or so it seems to retract again
I also just noticed my yellow clown goby nipped at this coral at least 3 times.
Don't know if it is doing it because it knows the coral is stressed,or if the goby caused the stress.
I had a Koralia#3 and it seemed like to much power for alot of the other corals. I have a Koralia nano,a azoo 1200,a HOB filter and a hob skimmer.
Any ideas would be appreciated.
![](https://forums.saltwaterfish.com/data/2/23/23595fee_vbattach232615.jpg/width/525/height/525/flags/LL)
![](https://forums.saltwaterfish.com/data/e/e7/e7b8a9f9_vbattach232616.jpg/width/525/height/525/flags/LL)
Although lousy,I attached a picture.If you look at the front of the coral a little to the right, you can see the split. Also lying on the sand righ in front of the split seems to be part of the coral.
The 2nd picture is what it looked like about a week ago
I have had this coral for around 30 days or so. It was doing fine. Swelling up huge and the tenacles reached way out. I did however move it from the middle of the tank to the left corner.Light would not have changed,but flow might.Now it opens more at night when the lights are off.Although it still opens after the lights come on,after about 6hrs or so it seems to retract again
I also just noticed my yellow clown goby nipped at this coral at least 3 times.
Don't know if it is doing it because it knows the coral is stressed,or if the goby caused the stress.
I had a Koralia#3 and it seemed like to much power for alot of the other corals. I have a Koralia nano,a azoo 1200,a HOB filter and a hob skimmer.
Any ideas would be appreciated.
![](https://forums.saltwaterfish.com/data/2/23/23595fee_vbattach232615.jpg/width/525/height/525/flags/LL)
![](https://forums.saltwaterfish.com/data/e/e7/e7b8a9f9_vbattach232616.jpg/width/525/height/525/flags/LL)