jake0110
Member
I have a 150 gal FOWLR with a 20-30 gal sump. (I never measured the volume.)
The two overflows enter the sump on the left, and there is one baffle on the right part of the sump.
I have a skimmer and a UV sterilizer.
Here is what I am thinking as a new set up for the sump:
Left side of the sump....
Both overflows hit the refugium ( I am concerned about too much waterflow in to that area)
Install a baffle between the fuge and the center part of the sump.
Center part contains......
Pump to return water back to the main tank
Water flowing back from the UV sterilizer
Then comes the pre-installed baffle
Right side contains......
Skimmer
Pump for the UV sterilizer
Does this sound right?
If so, what do you recommend I use for a baffle on the left side of the sump? My sump is all glass.
Thanks...... =)
The two overflows enter the sump on the left, and there is one baffle on the right part of the sump.
I have a skimmer and a UV sterilizer.
Here is what I am thinking as a new set up for the sump:
Left side of the sump....
Both overflows hit the refugium ( I am concerned about too much waterflow in to that area)
Install a baffle between the fuge and the center part of the sump.
Center part contains......
Pump to return water back to the main tank
Water flowing back from the UV sterilizer
Then comes the pre-installed baffle
Right side contains......
Skimmer
Pump for the UV sterilizer
Does this sound right?
If so, what do you recommend I use for a baffle on the left side of the sump? My sump is all glass.
Thanks...... =)