Originally Posted by
rcdude1990
do u mean a hang on over flow?
that has a U-tube?
if so then u have to get a piece of air line tubing, put the piece of airline tubing in the U-tube right were the curve is on the U
MAKE SURE THE AIR LINE U PUTINSIDE THE TUBE IS LONG ENOUGH FOR U TO SYPHON IT WHILE INSIDE THE OVERFLOW BOX!
place the U-tube inside the overflow and syphon the air line u put inside of it
be prepared to get a lil saltwater in ur mouth
look in the U-tube while syphonin, wen the water from the overflow to the drain (depends on ur set up) thats inside the U-tube reaches the curve of the U pull the air line tubing out and there u go
it took me 2 tries so keep on goin
ill stay on this board and tell me if u need any help
Thanks I got help We almost had a mess on our hands had to turn everything off at first or we would of had a major flood. does the size of the tube we use matter I used one that was just a little smaller then the u tube what a time trying to get it out without loosing the siphin but I did it