Recent content by geraldwhite

done... lets see if he eats it... I put an alge clip and i ruberbanded one on a rock...

Is my Lawnmower starving? He has gotten really skinny since i put him in the tank... his head is much bigger that his body now... I see him chomping on the glass, but i dont know if hes getting enough... is there anything i can feed him?

Ok I figured it out, instead of placing the larger holes in the overflow, i will bring them up throuh the glass on the outside of the overflow and hide them in rock structure. This way the only thing in the overflow is the drain and returns.

Originally Posted by ameno That's a lot of holes, The only thing I can think of is to be sure there is enough room between the holes for the bulhead to fit, because they will be bigger then the hole and from the dwg. it looks pretty tight between some of them I dont know of anyway to reduce the...

Ok I have already made changes the holes that are drilled in the over flow box are now on oposite sides of there wall, this way there will the returns will not be directly in front of the hole! how did i miss that??!!

Ok guys here are some measurements for the holes in the over flow box, there will be two 1.5" drains and two 1.5" returns. The larger holes are for the closed loop system which will be ran by two pumps, thus the two holes each 2" in size. Note the holes are larger to accomodate for the...

Protine Skimmer is a must

Ok got it, yeah im thinking of having the overflow .5" below the water surface, and having two 1.5" drains for the sump. 3/8" for the teeth size and ill have about 8 teeth on each side, so about 32 teeth. The way i have the overflow drawn will be 10"x10" by 24.5" tall. I'm still laying out all...

Heres another question for you how big do you think my center overflow and the teeth on the overflow should be to supply 2000gph? to the sump.

Man thats a sick canopy, you make that yourself?

Originally Posted by ameno ok, now I understand, I've seen that type setup before, looks really good. So do you plan on running the pump suction line up into the overflow and then out the side of the overflow, If so I would think you would still need a bulkhead in the overflow bottom and also...

Originally Posted by ameno for your return I would go up to 2", a lot of pumps recommend 2X dia on the return for max. flow, but I would think 2" would give you plenty and reduce friction loss verses going 1.5" all the way. If there willing to install the bulkheads that might be a good option...

anyone???

I have no idea about it having babies... but i was thinking maybe copper got in your water somehow and killed him, but if you other inverts are ok.. anyone?

Yeah, the pump I'm getting has a 2" suction, and 1.5 return, should i up the return to 2"... A company is making my tank and i need to show them where i want the holes etc and what size, should i buy the bulkheads seperate and then measure them and put the bulks on my self or should i have them...