125 Gal Upgrade!!!

king_neptune

king_neptune

Active Member
tell me about it. i did 6 coats one morning one night for me. when I desperately wanted to mount the tank...i said NO!
 
fishkid13

fishkid13

Active Member
Originally Posted by Jas1
http:///forum/post/3100909
Didn't you see page 2? You can't rush a masterpiece
It takes time for the poly to dry SHEESH


Oh sorry
Page 2!!!

I thought most of the great masterpeices were over in Europe.
Originally Posted by King_Neptune
http:///forum/post/3101016
tell me about it. i did 6 coats one morning one night for me. when I desperately wanted to mount the tank...i said NO!
Its called spray on poly. Works just as good and much quicker.
 
king_neptune

king_neptune

Active Member
ya. not nearly as good. not even close to the saturation I got with 6 coats. at best you would be lucky if 6 coats spray made the same proofing as 2 coats regular.
 
fishkid13

fishkid13

Active Member
well when you don't spray it is not as thick, but you could do 3 coats of spray in the time it would be for 1 coat of other.
 
jas1

jas1

Member
Originally Posted by fishkid13
http:///forum/post/3101310
well when you don't spray it is not as thick, but you could do 3 coats of spray in the time it would be for 1 coat of other.
Guna hafta sand the last coat and reapply, got a few runs
And waitin on the walnut
 
jas1

jas1

Member
Lots of help!!! I'm having a hard time deciding wether or not to drill the bottom of the tank because the overflow boxes will take up a lot of realestate. So I'm thinking really hard about going with G-H.com.
 
fishkid13

fishkid13

Active Member
I was talking about the crying smilies but ok. I thought of the same thing so I drilled the back of the tank with the overflow bulkheads and returnes.
 
jas1

jas1

Member
1 1/2" I'll have two, one on each side on the back and the sea swirl in the center. I was thinking 2 of the 700gph glass-holes overflow kits??? The return pump is a Quiet One 6000
 
You must log in or register to reply here.
Top