Calcium level problem

whiterose

Member
I have battled high calcium levels for about a year now (450). I believe that the imbalance is causing brown algae and PH balance problems. I have done everything I know to do to get the calcium levels correct. I use reef carbonate, iodine, reef complete, and reef plus as directed on the bottle (twice per week). I also use Coralife salt and R/O water for water changes.
SOMEBODY HELP ME!
 

jdm_ae86

Member
450 ppm is actually perfectly where you want it..its most likely your other supplements that are causing problems. Stop dosing everything else besides the calcium and alk liquids(only when needed)..
 

whiterose

Member
I read that 450 is too high for calcuim levels and that they shoul be between 410-420 to be beneficial. So you guys are saying stop using the reef complete, carbonate, iodine, and reef plus? I don't know what else is causing the brown algae. It's not like the tank is new. It has been running for over a year! At what point do I continue the supplements and what supplements should I use? Maybe I am using the wrong things. :notsure:
 

nas19320

Active Member
What is your Alk level? Cal-Alk-pH is all a balance. Depending on what corals you have you may need no more than just water changes.
 

whiterose

Member
PH is 8.3, but I don't know how to test for ALK. I don't think I have a test for that is my huge kit.
The KH is 250 but I don't know if that is a factor, I know it's quite high. How do I lower the KH?
 

mburnickas

Member
450 is not bad, yes on the high side but that is the max I would go.
Yes, I would stop adding a "that stuff" and would not even bother with iodine.
dKh is related to Alk. dKH should be from 7 to 11 and Alk should be 2.5 to 4.
And as noted before me, they are all integral to eachother.
Ph can be from 7.8 to 8.5 while 8.1 to 8.3 is better.
***Take this link and BOOKMARK it

https://www.saltwaterfish.com/vb/show...ium+alk+and+pH
 

clarkiiclo

Active Member
The less stuff you add to your water the better.
I use a Red Sea Alk test. It is kinda basic but it works.
Salifert makes a really good one.
 

mburnickas

Member
just got done doing my tests and so far I love all my Sailfet's except for Ph. The Sailfet Ph test is "more general" , on the scale to read, then my old Red Sea one. Weird.
But all the other Sailfet's test are more accurate I think...and cheaper in the long run.
 

bang guy

Moderator
Your Calcium is fine at 450. Your KH is too high though. Cut out the carbonate additives until it's around 150 - 175.
 

whiterose

Member
I was always told to use calcium, strombium, iodine, trace elements, and a buffer. It's hard to know what to use or not to use because there is such a variety of opinions out there. Do you think the high alkalinity is causing brown algae to explode?
 

jdm_ae86

Member
Do you think the high alkalinity is causing brown algae to explode?
no, but it could be other things..
what kind of top off water you use?
how old are your bulbs?
how much are you feeding, how often?
 
T

tizzo

Guest
Iodine will promote algae. So will old lights. And suspension foods also. You said...
It's hard to know what to use or not to use because there is such a variety of opinions out there.
Lets keep it simple... Add nothing, until your test kits tell you that you need to add something. Trace elements and all the iodine you need will come in your salt mix, and if they don't, switch salt mixes. Oceanic has been very successful for many of us.
The absolute ONLY things I add are the 2 parts of my B-Ionic. When the Alk's low, I add part 1. When the calcium is low, I add part 2. That's it. I target feed foods that are sometimes soaked in those suspension liquids, but I never just dump them straight into the tank.
 

whiterose

Member
My lights are brand new, I feed every other day and use frozen cubes and pellet foods for the scavengers, and I use R/O water for top off. What are the part one and two you are talking about Rizzo? I'm not farmiliar with how those are used.
 
S

sebae0

Guest
what is your phophate levels and what kind of water flow do you have? po4 is a main contributor to brown algae.
 
T

tizzo

Guest

Originally posted by whiterose
What are the part one and two you are talking about Tizzo? I'm not farmiliar with how those are used.

:D
 
T

tizzo

Guest

Originally posted by whiterose
What are the part one and two you are talking about Tizzo? I'm not farmiliar with how those are used.

:D
 
Top